Jump to content
SAU Community

Recommended Posts

As topic says, cleaning out my shed as I am about to move, so if i can help it, don't want to move everything, especially since I am not using most of it

So here it goes:

Car Parts:

Adjustable Rear Toe Arms

To suit r32, s13, most nissans i think

brand new, never used. no longer needed

$150

R33 Wheels and shagged tyres x 2

No longer needed. Tyres have camber wear

$80 pair only

3 inch decat pipe

Came with the car. Not the prettiest thing, but if you want to get rid of your cat, this will do it

$50

turbosmart rb20 blow off valve adapter

have rb25 now, so no longer needed

$40 these are $90 from the shops so less than half price.

R32 flared fiberglass front guards

No longer needed. Never fitted. Condition ok.

$150

Pioneer single din DVD player and screen

No longer needed. Can show working in car.

$400

Xplod CD player

Had it in my last car. Pulled it out before selling it.

$20

Pioneer tape player

That's right, you read right. Tape player. Can control pioneer stackers though, so could be good value

$20

R32 Stock Airbox

$50

Blaupunkt 2x10 inch Subs

Carpet is peeling off the box on one spot, but apart from that, good value. Can show working

$100

Gold Class Cinemas reclining chair

No room in my new place for it

$80

R32 KYB climb shocks and springs

Nice and low. One front was leaking. Not sure how bad. Got coilovers instead so no longer needed.

$100

R33 RS*r springs for front and standard springs for back

Nice and low. No longer have my r33. Cheap way to lower your car.

$50

R32 LHS Headlight

$100

for some reason, can't seem to upload any pics, so will provide a link to the pics shortly. otherwise, just forward me your email address, and the item you are interested in and i can send the pics

prices are firm

you can contact me on 0403 437 653

Link to comment
https://www.sau.com.au/forums/topic/232505-cleaning-out-my-shed-sale/
Share on other sites

  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...