Jump to content
SAU Community

Power Pushed Through A Stock Bottem End.. Rb26

mr324doors

By mr324doors,
in Engines & Forced Induction

 Share

Recommended Posts

mr324doors Collaborator

mr324doors

Posted
Posted

hey all, im curently importing a r32 with an rb26 in it,im goin to use it for some track fun only, its all stock apart from a large front mount and some kind of hks zorst, just wondering what power i can push through it with the stock internals? whats safe with rb26s, im goin to change the turbos to some kind of after market with steel wheels before i do anything,as i know they wont last very long. ive tryed to do a few searches but it takes to long with the dial up net speed i have at the moment, any help and advice would be great, thanx dazza.

LotusGTR Veteran

LotusGTR

Posted
Posted

I'm no expert but can tell you from personal experience it will not only be the power you generate that will crumble your internals, but also the age and condition of your bearings, how much oil pressure your engine is making, whether you're running an oil cooler. My engine shat its bearings running 200RWKW and the engine wasn't all that bad prior to going to the track.

Personally I find the figures quoted in the UK thread unbelievable. My guess would be at some of those higher numbers a 'standard internals' 100,000km GTR engine will be a grenade.

Angus Smart Grand Master

Angus Smart

Posted
Posted

Yerp at the end of the day it all comes down to engine condition,

and your not going to know the full extent unless its pulled down.

then while its pulled down your going to rebuild it right??

Angus Smart Grand Master

Angus Smart

Posted
Posted
yer thanx for that, yer im just tryin to be a tight ass at the moment, but i can see it will come back and bite me in the ass later.

tight ass and gtr usually turn into broke ass and broken gtr.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...