Jump to content
SAU Community

Recommended Posts

:D HEY ALL :blink:

im in your help again as i need to know weather a rb25 turbo is the same size as a rb20.

****the reason for this is...****

i have dropped a rb20 im my e30 bmw and after this conversion my turbo is just clearing the chassis rail by 20mm so there is not much room to make it any bigger so i need a turbo basically the exact same size. and if the rb25 does happen to be the same size what is involved to install the rb25 e.g. pipes the target for the power it will produce is 200kw atw or a bit over

your helpis required thanks :):rolleyes:

dont quote me, i think rb25 turbo on an RB20 will get you about 180-190 with supporting mods, fuel pump, injectors, computer, zorst, cooler. But I think it would be stretching it to get 200. Someone will know better but thats the general power area im pretty sure.

as for the physical size of the turbo It's slightly larger.

hope this helps

edit: http://www.project32.net/img/turbo_actuators.jpg - 25 turbo on left, 20 turbo on right

dont quote me, i think rb25 turbo on an RB20 will get you about 180-190 with supporting mods, fuel pump, injectors, computer, zorst, cooler. But I think it would be stretching it to get 200. Someone will know better but thats the general power area im pretty sure.

as for the physical size of the turbo It's slightly larger.

hope this helps

edit: http://www.project32.net/img/turbo_actuators.jpg - 25 turbo on left, 20 turbo on right

OKAY thats fairenough but what if i high flowed the turbo is that goin to give me that power gain to get me closer??? i will be doing the above but also chucking in some tomie cams for that bit more punch surley that will get me on the money??? and how much boost could be put through it???

an rb25 turbo on a rb20det will push around 180-190kw depending on tune (sometimes hit 200kw depending on dyno)

I currently have a hiflow rb20 turbo which will be getting installed next week along with a tune.

I'll let you know how much power I will gain with the hiflow.

Although there are different stages of hiflow so it depends how much you willing to spent to get it past 200kw

Some info here;

http://www.billetturbochargers.com/Turbo_r...and_hiflows.ews

an rb25 turbo on a rb20det will push around 180-190kw depending on tune (sometimes hit 200kw depending on dyno)

I currently have a hiflow rb20 turbo which will be getting installed next week along with a tune.

I'll let you know how much power I will gain with the hiflow.

Although there are different stages of hiflow so it depends how much you willing to spent to get it past 200kw

Some info here;

http://www.billetturbochargers.com/Turbo_r...and_hiflows.ews

im after spot on 200 kw atw but if its more thats sweet as but nothing less will be taken bloody wrxs are getting me atm damn there awd im currently lookin @ converting mine not a easy excercise

im after spot on 200 kw atw but if its more thats sweet as but nothing less will be taken bloody wrxs are getting me atm damn there awd im currently lookin @ converting mine not a easy excercise

would be easier and probably cheaper to sell up and buy a gts4 :rofl:

A gts4 with rb20 and 1450kg is not a WRX beater in no way shape or form.

besides, this fella has an RB20 in an E30 (I would have gone sr20 but anyway)

that is the reason for his turbo upgrade issue. nothing physically bigger will fit in the stock spot.

A gts4 with rb20 and 1450kg is not a WRX beater in no way shape or form.

besides, this fella has an RB20 in an E30 (I would have gone sr20 but anyway)

that is the reason for his turbo upgrade issue. nothing physically bigger will fit in the stock spot.

exactly right gtst it is a fair bit lighter good suspension set up and i think it could get to the point of beating a wrx... im not out to even try and kill a sti what you think???

is it possible

A gts4 with rb20 and 1450kg is not a WRX beater in no way shape or form.

besides, this fella has an RB20 in an E30 (I would have gone sr20 but anyway)

that is the reason for his turbo upgrade issue. nothing physically bigger will fit in the stock spot.

lol obviously not stock, and i forgot he had the motor in a diff car :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • With the system, once you drive it for a bit, and before you turn the car off, does the car fix its date and time? When you say the date is wrong, what date does the vehicle think it is, and does it always show the same date? My thoughts from a process driven view is; The system may be defaulting to a standard start date/time. The main reason you'd typically see this occuring, is the system is losing its constant/backup power supply.   If its always defaulting to the same date/time at start up, and especially if it fixes itself while driving, I'd say either the non volatile memory has an issue, or the power supply to the volatile memory that stores this information.   The other thing I'd check is if there is anywhere in the system you can adjust the date and time from. If the date/time is still moving forward since it wished you happy new year, then it is 100% possible the system has just had a bit of data corruption occur, and you likely need to find a way to reset the date/time in the vehicle.
    • Scissor Jacks are an accident waiting to happen, the only time they should be used are in an roadside flat, even then a tyre and rim should be placed underneath 
    • You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
×
×
  • Create New...