Jump to content
SAU Community

Stripping Ceffy - Rb25 Midnight Purple + Lots Of Mods

JiN_MaN
 Share

Recommended Posts

JiN_MaN Veteran

JiN_MaN

Posted
Posted (edited)

OUTSIDE

Square Headlights - $300

Clear Corner indicators - $75

Rear Lights - $300

Clear Indicators in front Bar - $75

Mirrors - $50

Boot - $150

Doors - $ 150

Rear Window - $300

25-30mm Firberglass Front guards, Vented- $250 Pair

Wheels - Multi 4/5 114.3

17x8

17x9

Remember when your looking at the photos that the fronts are 25mm guards but they have 15mm spacers on there as well.

$1000

PERFORMANCE:

RB25 motor from R33. Has some internal engine work, suspect cams/headgasket, But as I have not had the motor opened I cant confirm this.

Turbo has HKS Actuator (suspect highflowed)

AFM,ECU,injectors, plenum is all included.

$2000 Comes with everything, INCLUDING COMPRESSION TEST!

HKS Intercooler (check pics)

$450

40mm Alloy Radiator

$250

HKS 'Snail' Dump pipe

$250

3" Front pipe

$150

Blitz Dual Solenoid boost Controller

$300

RB20 Gearbox

$400

CONVERSION LOOM FOR RB25 IN CEFFY

$150

Cross member

$200

Rear Sub frame (Just the frame with, all stock arms) NO HICAS!

$150

INTERIOR:

MOMO Race Steering Wheel

$150

Water Temp gauge

$100

Tomie Boost Gauge

$80

Turbo Timer

$50

SUSPENSION:

Cusco Castor Rods

$200

Nismo 2 Way - Not in housing

$650

Pineapples

$80

5 Stud Conversion with R33 Brakes All Round, Cross drilled on the rear and race pads all round and fantastic drum handbrake on rear for drifting.

$1200

Braided Brake Lines All Round

$150

IF ITS NOT LISTED JUST POST WHAT YOUR AFTER AND ILL LIST A PRICE.

EVERYTHING FOR SALE!

Parts sold:

Coilovers

Bodykit

Bonnet

Cage

post-27843-1219644906_thumb.jpg

post-27843-1219644913_thumb.jpg

post-27843-1219644920_thumb.jpg

post-27843-1219644927_thumb.jpg

post-27843-1219644935_thumb.jpg

post-27843-1219644944_thumb.jpg

post-27843-1219644954_thumb.jpg

post-27843-1219644961_thumb.jpg

post-27843-1219644968_thumb.jpg

post-27843-1219644974_thumb.jpg

post-27843-1219645292_thumb.jpg

post-27843-1219645306_thumb.jpg

post-27843-1219645316_thumb.jpg

post-27843-1219645326_thumb.jpg

post-27843-1219645336_thumb.jpg

Edited by JiN_MaN
skids_magee Rookie

skids_magee

Posted
Posted

hey mate, i'll take the head lights, clear indicators in bar, and the 25 converted loom. pm me your mob number!! or give me a txt. 0403513702 i'll pay postage to get it all up here to brissy

JiN_MaN Veteran

JiN_MaN

Posted
  • Author
Posted
hey mate, i'll take the head lights, clear indicators in bar, and the 25 converted loom. pm me your mob number!! or give me a txt. 0403513702 i'll pay postage to get it all up here to brissy

sorry mate, just sold all of those parts.

price on seats? each or a pair?

Yeh 1400r is right after $1200 with rails, no marks for $600 each with rails.

JiN_MaN Veteran

JiN_MaN

Posted
  • Author
Posted (edited)

Only parts left on the outisde are:

doors

left mirror

front/rear and passenger side glass

rear lights

Front guards (but might be sold)

Edited by JiN_MaN
blockasR32 Community Regular

blockasR32

Posted
Posted

How much for the guards and the front drivers door posted to mackay 4740??

And also, have u still got the in tank fuel pump holder??

Cheers

Blocka

AdMan Collaborator

AdMan

Posted
Posted (edited)

Shroud for air con components?

Turbo Timer brand?

How much for the rear centre garnish with Cefiro in it...?

All door lock/unlock button on drivers arm rest?

How decent is the cooler piping?

Steering wheel?

Cheers...

Adam. :P

Edited by AdMan
JiN_MaN Veteran

JiN_MaN

Posted
  • Author
Posted
Handbrake Cable

Clutch Pedal Box

Pm sent

What cable do you want. Handbrake to the center piece near the diff or cables right through too the brakes?

Clutch Pedal box $80

How much for the guards and the front drivers door posted to mackay 4740??

And also, have u still got the in tank fuel pump holder??

Cheers

Blocka

At the moment guards are on hold for somebody but, door is $150 (no glass) + postage so around the $200 mark all up.

Yeh still have the intank fuel pump holder $50

Shroud for air con components?

Turbo Timer brand?

How much for the rear centre garnish with Cefiro in it...?

All door lock/unlock button on drivers arm rest?

How decent is the cooler piping?

Steering wheel?

Cheers...

Adam. :P

Shroud for aircon components as in the plastic inside the car around the controls?

TT is a Blitz from memory

Really would like to sell all rear lights as a st but feel free to PM me an offer.

Have all buttons and controls in the drivers door $70, perfect condition

Cooler piping is HKS piping but its fits upto the GTR style HKS cooler will only sell as a kit.

Steering wheel is a MOMO 'race' perfect condition $150

Any Q's feel free to ask

AdMan Collaborator

AdMan

Posted
Posted
Shroud for aircon components as in the plastic inside the car around the controls?

TT is a Blitz from memory

Really would like to sell all rear lights as a st but feel free to PM me an offer.

Have all buttons and controls in the drivers door $70, perfect condition

Cooler piping is HKS piping but its fits upto the GTR style HKS cooler will only sell as a kit.

Steering wheel is a MOMO 'race' perfect condition $150

Any Q's feel free to ask

How old roughly is the cooler and piping? Mine looks to be a bit worn out. :D

Ill take the turbo timer, and yes thats right about the shroud, mine has a clip broken and the bastard keeps falling off. :P

Where bouts in Adelaide are ya? :)

Cheers mate...

JiN_MaN Veteran

JiN_MaN

Posted
  • Author
Posted
How old roughly is the cooler and piping? Mine looks to be a bit worn out. :)

Ill take the turbo timer, and yes thats right about the shroud, mine has a clip broken and the bastard keeps falling off. :P

Where bouts in Adelaide are ya? :)

Cheers mate...

PM Sent

toffy Veteran

toffy

Posted
Posted (edited)

sent you a pm ages ago , cant remember what i asked you for :) , are you selling the shell? how much with the dash pad front rear quater sunroof left in?

or how much for the dash pad (inc the left vent) ,

rear bar reo, de cat pipe , steering wheel , gear knob , rear seats ,

h/brake cables from the brakes (if the other guy didnt need them) and tail shaft?(if its for rb25 box)

edit: and diff? also the braded brakelines

and front hubs for 5stud

and speedo cable (i know some of the prices are up there :blush: ) .

Theres heaps more stuff i need , i might haveto drag my ceff outta the shed tomorrow :)

Edited by toffy
donkey_punch Proficient

donkey_punch

Posted
Posted

Hey,

I have sent you a couple of PM's about Interior bits that I'm after, Just wondering if they were still there or have they gone?

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • joshuaho96
      Squeaking clutch/throw out bearing

      By joshuaho96 · Posted

      How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • Dobz
      [Geelong,Vic] Used: pull type R33 GTR gearbox (no transfer case), Nismo super coppermix twin plate clutch

      By Dobz · Posted

      price drop $1000 gbox $400 clutch
    • sonicii
      Who has a Infiniti Q60, Q50 (V37)?

      By sonicii · Posted

      yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Take the fall as a warning sign for future endeavours  Stay safe mate
    • Alex.LA
      R34 GTR Vspec Garage Sale - All must go!

      By Alex.LA · Posted

      hi mate, HKS cooler piping still available by any chance?
×
×
  • Create New...