Jump to content
SAU Community

Recommended Posts

Hey guys, just wondering if someone who has done a few of these can help me out?

Im ready to put an engine in my gtr, Ive swapped the vacuum lines off the inlet side, ive put the exhaust side including the turbos on, swapped the wiring harness over, and now I have a single pin connector and no visible sensor to connect it to

As the wiring runs, it should be near the back of the oil filter housing, or near the aac valve

There is no single pin connector on the car near it, and Im just wondering if there is an extra wire in the harness for an accesory I dont have or anything like that...

Im hoping to put the engine back in the car tomorrow after 4 months off the road...

PLEASE help me out here guys

Link to comment
https://www.sau.com.au/forums/topic/233883-r32-gtr-engine-wiring/
Share on other sites

Is the oil temp sender plug towards the front of the front of the filter housing? Ive got one plug which is a spade shape of the front of the filter housing but thats plugged in... the wire Im talking about is a smaller plug, with a more circular shape single pin.. it isnt hidden next to the yellow plug with the rubber boot around it is it?

isnt that a 2 wire plug to the steering rack? or is that something else

yer sorry that is a 2 pin i just checked... the gtr engine harness wiring diagram shows that one u mention with 1 pin (aqua with red stripe i think it is) doesnt go to anything from what i can tell

http://www.importworkshop.com/files/manual..._GTR_manual.pdf

page 790 its right in the top left hand side of the page with the 2 detonation sensors, looks like the wire anyway

Edited by unique1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...