Jump to content
SAU Community

Recommended Posts

post-41741-1220617453_thumb.jpg

All for sale

R33 Caliper $250.00

DBA 4000 Series Front Rotors near new DBA No. 4963 $280.00 Pair

DBA 4000 Series Rear Rotors near new DBA No. 4908 $280.00 Pair

Complete set of Braided Lines R32 GTS-T RTA approved $250.00

Set of QFM Pads for above set up No.5's I think good street / track mix $250.00

All of the above has done 3 x 4 laps at Mallala on a greasey day. As you can see the temperature indicators on the disc are still coloured eg I didn't get em hot.

  • 1 year later...

From the research ive done, R33 calipers are a fair bit stiffer in their construction that R32 calipers. Dimensions appear to be the same. Rotors are 280mm for R32 & 295MM for R33.

Im guessing from your driving at Mallala you are located in SA??

From the research ive done, R33 calipers are a fair bit stiffer in their construction that R32 calipers. Dimensions appear to be the same. Rotors are 280mm for R32 & 295MM for R33.

Im guessing from your driving at Mallala you are located in SA??

Im guessing you are new, and didn't check that the thread is 2 years old....

Not so much new as tired & under the influence of grog. Did a keyword search, so naturally the small amount of matches very quickly went back to old posts....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...