Clutch And Flywheel

[Madaz]

that would probably be only there 850kg pressure plate

the one i would get is similar its a 5 puk nice thick ceramic pads too and a rating of 1220kg pressure plate and rated to about 350rwkw

its up to you but im not going to keep wasting my time i will ring Doug tomorrow get more prices and start the group buy it will run for 4 weeks so you will have 4 weeks to decide what you want

[Cubes]

For the price you can get better.

As already mentioned in this thread.

A bloke I know also had his ceramic Extreme weld/stick to the flywheel.

He was told it was because he was driving it hard and then turning the car off soon after which was a load of crap.

He would launch it. Clutch would stick and he would be left decelerating either between first trying to grab second or second trying to grab third. Not to healthy for the gearbox/motor. :S

Not all the time but enough of the time to be concerned.

Grab a tried and proven genuine exedy. There's also been good reports with those NPC clutches.

I really don't like the Extreme for the cost of their clutches alone. :S

[SLED]

Exedy do a beautiful twin plate setup with the familiar Boss Drive that the Nismo Coppermix have...........that was my 2nd choice.

[Fabs_32]

I want to get a fairly decent clutch that isn't too hard for driveability but that can still take a hammering at about 200-220kw.

Money aside, Is a twin plate a good idea for me (they're softer arn't they?) or reckon I can get away with a single?

[SLED]

if you had approx 100kw more I'd say go for a twin plate but at 220kw you're around the same power as Steve (Madaz) so go with his ceramic group buy thingy.

[Fabs_32]

Ok, if u think it's a good idea. But is it gonna be heavy as? Is my left leg gonna become twice the size of my right? Well I do push that accelerator pretty hard so I might be alright.

By the way sled, thanks for trying to sort out the hoodie sutuation. Ur a champ! If u need anything don't hesitate to ask!

[Madaz]

if you had approx 100kw more I'd say go for a twin plate but at 220kw you're around the same power as Steve (Madaz) so go with his ceramic group buy thingy.

Pete even 100KW more than im making and its still good for its rated to 350RWkw man

Ok, if u think it's a good idea. But is it gonna be heavy as? Is my left leg gonna become twice the size of my right? Well I do push that accelerator pretty hard so I might be alright.

By the way sled, thanks for trying to sort out the hoodie sutuation. Ur a champ! If u need anything don't hesitate to ask!

it may take a week for your leg to get used to it i drove one in a mates GTR for an evening and was used to it in 10-15 mins but ive been driving a lot longer and are on my 2nd HD clutch granted it is only 850kg pressure plate

[Fabs_32]

Well, really, I should stop winging. If it doesn't slip that's the main thing! I'll get used to the heavy clutch!

P.S. Is that how u spell winging? it just looks odd....

[Madaz]

thats wing'ing it whinging << but quit your whineing

[craig R33]

steve, it seems there is a bit of interest in another group buy mate.

me for one

[Madaz]

yeah ill try and do the leg work tomorrow

ill add the aforementioned clutch in post #2 ill ask for the next clutch up that's the $900+ one for the GTR and double check twin plate prices and rebuild prices and see minimum quantities

i am taking Jema to the Show tomorrow also so i have to be diligent with my time

[craig R33]

do it monday steve, family first champ!

[Madaz]

na better to start a group buy on a friday after payday where as monday everyone has spent there monies

im only going for half the day im not made of money

[Madaz]

Clutch Group Buy OPEN >>HERE<<

[Kieran]

mine was slipping bad and now cant even get a gear.... i might need one that can hold a bit more grunt tho than 300-350kw

Edited September 8, 2008 by Kieran

[craig R33]

read the post above you mate

[Madaz]

mine was slipping bad and now cant even get a gear.... i might need one that can hold a bit more grunt tho than 300-350kw

go post in the GB thread i didnt bother getting a price for his 10' clutch but can if your interested the 10' one is this

>>HERE<<>>$1023<<

[Jonnyboy89]

incase anyone cares the car is in at extreme now, for a little bit more than the group buy price i got a 6 puk extra heavy duty button, chromeoly flywheel and replacement of the spiggot bearings/bush blah blah for around that price, if you want extra info about who installn it or whatever then pm, be happy to help

[Madaz]

yeah for there $690 Xtreme clutch i would rather one of NPC's i've had 2 Xtreme clutches and there not that extreme i know a lot of disappointed customers too a lot are happy a lot disappointed that is all i'm saying

[mid life crisis]

i can vouch for the clutches that madaz arranged as im the bloke that fitted it into oz_pommy r 33 his car has 250 kw at the rear wheels and this clutch grips like a turd on a hairy arse . its very drivable a little heavier on the pedal than standed but great value for money and does the job .

if you want too blow for bucks on a "brand name " just for bragging rights go right ahead if ya want too save some bucks and have something that works great then have a word to madaz.

cheers mid life crisis