Jump to content
SAU Community

Recommended Posts

Hey guys.. just wondering what bucket seats you've got in your R34 GTT?

Has anyone had any experience with the justjap seats here?

http://justjap.com/store/home.php?cat=268

Also what rails did you get for your GTT? I've seen some on ebay which say they're for 32/33/34 gts-t/gtt ... but I've always through the 34 gtt was different to the rest of the series?

i've heard that genuine bride rails would fit just jap seats by drilling 2 holes into the rails..

other alternative is look out for used recaros or brides with rails on them that bolt straight into the r34 less hassle?

I'd like to test-sit in some brides if anyone in Perth has some... I hear they are for skinny/malnutritioned people only. I'm a little wide-of-girth... So I'm not sure if I'll buy brides myself, or not..

I've been told Recaro's are wider, is this true??

Bride Euro II's. Bride rails. Love em.

Bought it all from the guy in my sig.

+1 for the BRIDE Euro II's! I got them too...lovin them also!

Chris, you ended up with bride rails too? Thought you were getting your hands on those "generic" rails that thuy had for you?

not buckets but i put r32 gtr seats with rails into my gtt. 3/4 holes lines up. the rear bracket closest to the door needs to unpicked moved slightly angled and rewelded. fits like a charm. havent had any problems so far. and they pretty much blend in with the r34 interior colour

not buckets but i put r32 gtr seats with rails into my gtt. 3/4 holes lines up. the rear bracket closest to the door needs to unpicked moved slightly angled and rewelded. fits like a charm. havent had any problems so far. and they pretty much blend in with the r34 interior colour

Got any pictures? I was thinking of putting some new seats in my R34, not sure if i'll go R32 GTR, R34 GTR or Some East Bear R34 GTR Copies.

Got any pictures? I was thinking of putting some new seats in my R34, not sure if i'll go R32 GTR, R34 GTR or Some East Bear R34 GTR Copies.

I've been looking at the 34 east bear seats for my 32 as theyre about half the price of the cheapest brides :D othgerwise if i splash out ill end up getting BRIX II

+1 for the BRIDE Euro II's! I got them too...lovin them also!

Chris, you ended up with bride rails too? Thought you were getting your hands on those "generic" rails that thuy had for you?

Thuy ended up finding some second hand bride rails. I am not sure of the rail model, but they are a perfect fit.

I can probably put some pics up for the seats installed, might be able to get some rail pics too if I have the time :)

Yeah ^^

What'd you do about rails?

How much that set you back roughly bud? Pics?

You can buy R34 GTT rails for bride seats from Autobahn and other places. J-imports get them too, both Bride and generic from Japan but being in SA you might need to pay for double handling - extra postage cost, which may negate any savings.

I reckon they were about 1700 including all rails and shipping. Basically worked out to be rails for free. Can't remember exact amounts as it's all been payed for with other parts and in cash.

Thuy ended up finding some second hand bride rails. I am not sure of the rail model, but they are a perfect fit.

I can probably put some pics up for the seats installed, might be able to get some rail pics too if I have the time :dry:

You can buy R34 GTT rails for bride seats from Autobahn and other places. J-imports get them too, both Bride and generic from Japan but being in SA you might need to pay for double handling - extra postage cost, which may negate any savings.

I reckon they were about 1700 including all rails and shipping. Basically worked out to be rails for free. Can't remember exact amounts as it's all been payed for with other parts and in cash.

Thanks for the reply bud! I'll definately keep that in mind.

Thuy ended up finding some second hand bride rails. I am not sure of the rail model, but they are a perfect fit.

I can probably put some pics up for the seats installed, might be able to get some rail pics too if I have the time :dry:

You can buy R34 GTT rails for bride seats from Autobahn and other places. J-imports get them too, both Bride and generic from Japan but being in SA you might need to pay for double handling - extra postage cost, which may negate any savings.

I reckon they were about 1700 including all rails and shipping. Basically worked out to be rails for free. Can't remember exact amounts as it's all been payed for with other parts and in cash.

That's a negative on 34 rails from autobarn...32/33 only i'm afraid...

Oh damn... my mistake.

For a car that's been around for 10 years, they sure make it hard to find certain stuff compared with the other models. I bet those with V35's really struggle.

Hey guys,

I had been looking at bride rails on ebay.. and this guy advertised that he's got rails to suit r32/r33/r34 gts-t/gtt. When I asked him if the r34 gtt rails were different to the r32/r33s.. he replied

Hi,

Sorry for delay,

These rails suit the R34 GTT not the GTR's.

Thanks

I always thought 32/33 rails are different to 34's.... if so is he wrong in assuming they'd fit a 34?

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...