Jump to content
SAU Community

Recommended Posts

Sard 700cc Injectors

Brand new, still in plastic wrapping. Suit GTR.

$950

HKS 2835R

Used, has internal wastegate. Bolt on to SR20 exhaust manifold.

$2200

HKS EVC4

Used, comes with wiring loom, solenoid, control unit.

$500

Trust TD06-20G kit

To suit RB20 or RB25 head. Comes with wastegate, stainless steel exhaust manifold, TD06-20g turbo. Used. Will separate.

$3300

RB26 stainless exhaust manifolds

HKS manifolds, to suit T25 flange. Used, comes wrapped in thermal tape.

$1100

HKS split dump pipe

Used stainless steel dump pipe, to suit RB20 or 25 engines. Standard turbo or HKS 25xx series. With pipe to cat.

SOLD

Front mount intercooler

400x250x60? Came from an R32 GTS-T, would suit most cars due to it's size. Used, no leaks.

$500

HKS GT-SS turbos

Pair of brand new GT-SS turbos. T25 flange, kit is for RB26. Comes with gaskets and mounting hardware.

$4000

To fit those injectors into an R33 RB25 you need to use a top feed fuel rail (modify an RB20 one) and install a resistor pack to use the low impendance injectors.

Location is in Sydney, pics can be found here.

Trust TD06-20G kit  

To suit RB20 or RB25 head. Comes with wastegate, stainless steel exhaust manifold, TD06-20g turbo. Used. Will separate.  

$3300

Every RB20 owner needs one :)

If any Syd owners are considering the kit, your welcome to inspect or go for a ride in my car which has the identical setup.

Sorry about the late replies, email here is sometimes quicker. Pete, email me cause your box is full.

Will go and take some pics now and post them.

Originally posted by rb25

thats an EVC3......

Check out the instructions: here .

I'm not any authority on the HKS catalogue, but if there's a publication by them on how to use and install the device and they call it an EVC IV then I guess I will too.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...