Jump to content
SAU Community

Speedo Cable Dillema

xsv_32
 Share

Recommended Posts

xsv_32 Enthusiast

xsv_32

Posted
Posted

Right...

I have an R32 coupe that was originally a auto. Now its manual, with an RB30DET and RB30 gearbox. The cable in the auto setup snapped and killed my powersteering so I want to know, is which cable can I use that will match the RB30 (VL commy) gearbox and still match the R32 cluster. Also will an automatic cable work on a manual box?

Secondly which clutch line can be used? Are cefiro/skyline/laurel all the same?

Any advice would be awesome.

Cheers, xsv_32

Link to comment
https://www.sau.com.au/forums/topic/237856-speedo-cable-dillema/
Share on other sites
Shaun Mentor

Shaun

Posted
Posted

I dunno about the RB30 stuff, but id be pulling the mechanism out of the RB30 box and comparing the diameter and number of teeth on the nylon speedo gear with the R32 one. Use the search function on this forum, go the tutorial section and type in r32 speedo sender and a tutorial from Cubes should come up. Heaps of info on swapping the r32 gear to a nissan navara gear for proper speedo function. It may be possible to swap the auto r32 gear to the VL sender unit.

Shaun.

  • 3 months later...
R33-BEGINS Newbie

R33-BEGINS

Posted
Posted

Hi i have a gtr r33 year 1996 mi gear box the center transfer the cluth are bad and i buy a gear box of gtr r32 i know the two transmission are the same pull type this is i have, but i see the speedometer on the trasnfer of gear box gtr r32 is cable...and the transfer speedometer of gtr r33 is electronic, i wanna to know if can put this gearbox gtr r32 into gtr r33 and don´t conect the speedometer, what do you think what happed i know the speedometer don´t work but i wanna to know if don´t affect others think in mi gtr r33, or if you have others solutions thanks......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...