Jump to content
SAU Community

Recommended Posts

Hi all,

I changed my radiator hoses and coolant today. I was shocked. Seems the part where I attach the hose has rusted through. Any fix for this? (I've included some pics.)

Urgently need some help.

RB25DE - Non turbo

Cheers

post-41585-1222509590_thumb.jpg

post-41585-1222509618_thumb.jpg

post-41585-1222509643_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/237858-r34-cooling-system-problems/
Share on other sites

Wow, that's not good.

Would say you engine hasn't been running any inhibitor in the coolant system. This stops corrosion of the metal and alloy parts throughout the system. Make sure you put some in once you've fix this up.

I would say the the steel tube will need to be cut out of the aluminium intake maifold and a new pipe pressed into place.

I would recomend an engineering workshop or competent mechanic.

oh god

i was hoping to do a coolant flush this weekend

i hope i dont see what ive just seen.

hehe - i was thrown back at the sight.. pretty nasty.

Nissan was quoting $800 for the bottom half of the intake manifold, as it is 1 piece (ordered from Japan - brand new item) they do not supply the tube end.

I probably can go to a machine shop and get a new pipe inserted, but its gonna be a pain taking out the intake manifold, i wonder if they can fix the issue with it still in place,,,,

Could possibly do it in place, but you risk getting metal shavings into the system.

The intake is really too hard to take off. Take the top section off first, then it'll be easier to get at the bolts that hold the lower section to the head.

After much thought and discussion with some mates I've decided to get the exact dimensions of the rusted piece and get a custom piece made up.

I'll then chisel out the rusted piece and press fit the new custom piece.

I wonder if stainless steel would be a good idea or not - I mean would it cause a bad reaction with the coolant etc?

I've found an engineering place nearby http://www.yann.com.au/

Any thoughts or pre-cautions?

Wow, that's not good.

Would say you engine hasn't been running any inhibitor in the coolant system. This stops corrosion of the metal and alloy parts throughout the system.

yeah man thats f*cked

your welsh plugs would be pretty thin now i recon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...