Jump to content
SAU Community

Upgreading Brake Pads And Disks... Help

Royalflush
 Share

Recommended Posts

Royalflush Collaborator

Royalflush

Posted
Posted (edited)

hey guys.. Looking at upgreading my brake pads and disks on my S2 R33...

I was thinking going Slotted break disks and maybe Green stuff pads...

any oppinions and suggestions would be good..

I'm not too sure were the best palce i can source good/cheap break disks or pads form so any help would be good...

thanks guys =]

Edited by Royalflush
gslrallysport Experienced

gslrallysport

Posted
Posted
just put a set of DBA street series slotted rotors on the rear of my r33 with a set of ferodo XL pads... awesome braking now they are run in...

I won't get into a DBA vs. RDA argument, cause they never end well, but the one thing people are starting to agree on quickly is QFM pads...

If you just do street stuff, then the QFM HPX pad is the same sort of performance as something like a Bendix Ultimate, but if you ever plan to do track work, or want the best street brakes available, the QFM A1RM is still a 100% streetable pad, and is good for 780 degrees, and what we personally run in the rally car. Group buy pricing of half price rears is sort of just sticking around, so you can get front and rears A1RMs delivered to your door for $191, or $131 for the HPX.

http://www.skylinesaustralia.com/forums/Au...ra-t231267.html

Some of the recent reviews of QFM:

http://www.skylinesaustralia.com/forums/Br...t&p=4138203 (SAU)

http://www.skylinesaustralia.com/forums/Br...t&p=4141983 (SAU)

http://forums.justcommodores.com.au/820679-post3.html

http://www.boostcruising.com/forums/index....mp;p=1282156408

http://www.boostcruising.com/forums/index....mp;p=1282506286

For more information checkout www.qfmperformance.com

gslrallysport Experienced

gslrallysport

Posted
Posted
I need prices.. 4x new disks & 4x new pads.. where to buy and whats best for street?

Check in the Group buy section of the forum for RDA prices, as they're very good, and I won't take it away from them. But with regards to the pads, if its street only, then QFM HPX pads are as good as Bendix Ultimate's in performance, but minus the dust and rotor wear. I'm still honoring the group buy pricing of half price rears, which makes a front and rear set delivered to your door for $131.

Cheers,

Greg

Z1LLA Proficient

Z1LLA

Posted
Posted

Definitely check out the Group Buy section, there are good prices on slotted rotors and EBC or QFM pads, cheaper than buying through a normal auto parts store (unless you know someone there who can get them at discount or staff price).

Roy Grand Master

Roy

Posted
Posted

Honestly, having running std rotors, old school DBA rotors, new/current design DBA rotors and RDA rotors....if there is nothing wrong with your std rotors then keep them.

If they are undersized then sure replace them...but if they are ok thickness wise then keep them. Speak to your local brake shop to see if they can do $100 worht of machining some slots in them. It may be viable. The more i see of DBA and RDA rotors they are a cheap replacement rotor, not really great replacement rotors. The DBA 4000 series arent too bad for sporting driving but thats about the limit of them. RDA, well you get what you pay for and if you start to throw lots of heat through them i dont think they do as good a job as std or DBA rotors. Just an opinion....not a fact :P

Just ensure you run a good performance pad and good brake fluid. Pad feel is veyr much a case of driver preference so you may have to try a few until you find some you like.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Ah ok. I seem to be mixing it like everyone else does so not sure what's happening. Will experiment with it more.
    • GTSBoy
      RB25det

      By GTSBoy · Posted

      Depends on what you mean by OK. First up, was this done cold or hot? Are they reasonably consistent? Yes, they are reasonably consistent. Could be better. But unless it has had a build at some point, it is a ~30 year old engine and you'd expect some variation. Some of the difference could also be in user technique Is it good compression? Well....not numerically, no. New they were >160 psi. The one at 140 would be fine, in that context. If they were all ~140, you'd be reasonably happy. But the one that is @120 is twice as far down from the original numbers as the one @ 140. But.. (again)... technique can play a part in the absolute magnitude of these numbers, and the quality/state of repair/accuracy of the pressure gauge is not known. In the context of the above, the compression tester that was used last on my car is regularly compared to a known good pressure gauge. Not calibrated, exactly, but compared to a reference instrument that is not used for any other purpose, so cops no abuse. So we can trust the measurements off that tester. But another tester in the same workshop wasn't being compared against the standard and was reading a good 30ish psi lower. When you're reading 100 psu but the engine is really doing 130, you can make bad decisions.
    • GTSBoy
      Steps to DIY sanding car back ready for respray....

      By GTSBoy · Posted

      More likely from tiny bubbles in the filler/putty. Maybe be less aggressive when mixing it. Perhaps invest in a vacuum chamber to pull the air bubbles out?** **I don't know if this is a thing for body filler. I see hardcore epoxy makers degassing their mixed resin on the regular.
    • GTSBoy
      ER34 4Speed Auto 25DE Speed Sensor

      By GTSBoy · Posted

      IIRC, the speedo on these is fed from the sensor in/on the snout of the diff.
    • funkymonkey
      R32 Nostalgia

      By funkymonkey · Posted

      They were. I bought the AWD for experimenting but racing it would disqualify or disadvantage me from a few race classes. Def getting a FWD for racing.
×
×
  • Create New...