Jump to content
SAU Community

Fs: Apexi Power Fc + Hand Controller

datto260Z

By datto260Z,
in Australian Capital Territory

 Share

Recommended Posts

datto260Z Experienced

datto260Z

Posted
Posted (edited)

Hey all. The zed is in for a complete rewire and new computer atm. The reason being that having had 2 looms spliced, there were dramas with the tune being dropped when the car was switching off. This is not a fault from the computer, but I thought it time to get serious with the wiring and upgrade.

The computer was recently proven to work on a R33 at Trojan Motorsport on a SAU members car.

So:

Apexi Power FC + hand controller to suite RB25DET (R33, though may work on other models).

In good condition, though a few minor blemishes.

$1200 firm with 30 day money back guarentee, with proof from a tuner.

Pics: Its a power FC... But yes I can get some if needed or you can book a time with me to have a look.

PM or 0421780262. I recommend mobile as I work weird hours.

Cheers

Scott

Edited by datto260Z
Link to comment
https://www.sau.com.au/forums/topic/238131-fs-apexi-power-fc-hand-controller/
Share on other sites
datto260Z Experienced

datto260Z

Posted
  • Author
Posted

Thanks sfrizza and Matt.

I should add, I will only have this up for a short time in ACT, then will go to the national section, would prefer if you guys bought off me than someone I dont know, but I need the money.

TiTAN Grand Master

TiTAN

Posted
Posted
car is at autotech today so going to have a talk to ed when i pick it up about what my options are...car is running rich as but there is black shit all up the back of my car :)

black stuff all up the back of your car is normal if its running rich.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • lilley's gtr
      Rb26/30 build

      By lilley's gtr · Posted

      I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani Refurbed astra pump thats the cover for it in the boot I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
    • lilley's gtr
      Rb26/30 build advice on pros and cons

      By lilley's gtr · Posted

      I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
    • Sleepergm
      Nismo rear spats

      By Sleepergm · Posted

      lol no cats running str pipes … might put the high flow back on but I suspect it might effect my ignition timing a bit. 
    • MBS206
      Nismo rear spats

      By MBS206 · Posted

      That looks a bit like yellowing to me. If the rear bar was looking like that from rich idle, I'd ask the question, do you have a catalytic converter fitted, and fully working?
    • RA708
      G'day!

      By RA708 · Posted

      Oh yeah gets really bad down here. I’ll have to upgrade the heater and wind screen wipers as well for optimal performance.
×
×
  • Create New...