Jump to content
SAU Community

Recommended Posts

Lookin at swapping my baby for the right car or cash

Specs-

145,xxx Ks

Hi Flowed T3

GK Tech cooler and no holes piping

Boost controller

Twin B2 converters and twin hi flow lock offs (enough to flow 400rwkw of gas)

Microtech LT8s

Rebuilt Jatco 4spd with strengethened internals (shifts hard)

Tranny cooler

LSD

VQ Statesman slotted front Brakes

VY SS 18s freshly resprayed in asteroid silver with brand new tyres

Series 2 Blue Calais Interior in very good condition, no holes, rips, burns etc

car made roughly 165rwkw on 12psi

everything is there to make a sh1tload of power except the turbo n box, it made 210kw on 17psi (one dyno run) but was turned down to save the box

heaps of little sh1t im not gonna bother mentioning but you get the idea

For someone thats looking for a clean, neat and cheap vlt this is the one, i get compiments wherever i go even from old people, costs me about $50 a week to run n i drive everywhere

PRICE:$10,000 but would rather a swap

If your interested in swapping i want something

*Newer then mine

*Manual

*Turbo or V8

If your car doesnt meet all these criteria dont bother bout asking

DSC00268.jpg

DSC00287.jpg

DSC00289.jpg

before anyone asks the stockies were at the back coz i was gettin the other 2 rims sprayed and since that photo hte cooler pipe has been secured

email is [email protected] but dont bother emailing me coz i never check it just pm me im on here everyday

Edited by FORZA
Link to comment
https://www.sau.com.au/forums/topic/238661-swap-87-series-2-vl-calais-turbo/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...