Jump to content
SAU Community

Recommended Posts

im thinking of buying a s2 r33 skyline and was wondering if anyone has had trouble getting their car up steep driveways?

i live in nsw and dont know if any other state has the same entrances to their driveways. but i have one of those rounded entrances (as opposed to the flat ones), do these pose any problems for stock ride height on the skylines?

im afraid that when i do buy one that the car will scrape like crazy, so i was hoping someone would give me some advice before i make my purchase.

Link to comment
https://www.sau.com.au/forums/topic/23882-driveways/
Share on other sites

my driveway is really steep, and as long as i go up the gutter sidewaysi get up no prbs, my front bar sits abot 80mm off the ground is a lot longer the stocko which makes it terrible for speed bumps and the like but no prbs on the driveway.

Link to comment
https://www.sau.com.au/forums/topic/23882-driveways/#findComment-511068
Share on other sites

I have a 32 gtst at stock ride height, and have had no worries. Only scraped once (because i was going too fast). When i was looking at buying one, my folks were like, 'do u think that will scrape in the driveway?' That was one of their ways to tell me not to buy a line.

As for your driveway crossover (at the start near the road), it should meet council standard, because it is within council property. post some pics up. What sort of kerb is there? Mountable or barrier? I design roads, commercial driveways & carparks, might be able to help u out...

Link to comment
https://www.sau.com.au/forums/topic/23882-driveways/#findComment-511247
Share on other sites

the "cross over" part is rounded, thats what i was trying to say above. in sydney or my area atleast there are two types the rounded ones

__

(

or the flat ones

______

/

well thats the best i can do at the moment LOL..

ill do my best ot get my digi cam up and running tommoz.

thanx for the replys guys :)

Link to comment
https://www.sau.com.au/forums/topic/23882-driveways/#findComment-511389
Share on other sites

Originally posted by a5h

mine is stock height and it scrapes all the time it gives me the shits

yeah... but you don't have a stock front bar :)

those GTR-style front bars can be pretty low, i've known a few ppl who have munched them on gutters lol

ac1d3o3, can't speak for a series2 but i never have any problems whatsoever with a series1 (stock height, stock front bar).

Link to comment
https://www.sau.com.au/forums/topic/23882-driveways/#findComment-511557
Share on other sites

my driveway is a bitch squared

its a tight turn off a busy up hill street on a corner witha power pole in the road :)

we've had that many near misses with retards thinking they can come screaming up the inside (the direction im turning off)

then just to make things interesting, i scrape f*ck out of my front bar if im not super close to the fence backing out and turning;

it took us ages to work out what position to be in, not to scrape, but i think the damage has been done

my front bar is just about scraped all the way through :)

sure beats our old drive way though (would have been no way to get the skyline up the old driveway)

Link to comment
https://www.sau.com.au/forums/topic/23882-driveways/#findComment-511638
Share on other sites

When i picked up my car from the importer it had realllyyy low blistern suspension in it and the first time i tried to take it up my driveway no matter how many angles i tried it would get stuck half way up. I ended up cracking the front bumper a bit and had to take it back to the importer and put in some slightly higher springs in. Now it just makes it up with about 2mm clearance to the bumper and i have take it fully sideways. I have a 400r front bar and they hang down real low compared to the stock front bars.

Link to comment
https://www.sau.com.au/forums/topic/23882-driveways/#findComment-511766
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...