Jump to content
SAU Community

Recommended Posts

Item:

A. R33 GTR RB26 stock coil cover and timing cover, coil cover is perfect, timing cover has a few marks and has fresh satin black paint.....would be good for polishing, or painting, or whatever.

B. R33 GTR Genuine Nissan 400R clear front indicator lenses, perfect condition, these go for about $130 each usually on nismo.com.au

C. Apexi EL2 Boost guage, mechanical, perfect condition, the mounting base has been bent to suit where I wanted it, but could be reshaped easily, all wires and lines are included.

D. Trust GREX gearknob, suit Nissans, blue h-pattern sticker on top, nice knob to drive with

E. Lightweight wheel nuts, set of 20, black, some marks and chips, but a quick coat of paint would fix that, extremely lightweight, came with my Volk TE37's that were on the car when I bought it.

Age: all less than 12 months, except covers

Condition: as stated

Price:

A. $120

B. $150

C. $120

D. $50

E. $50

To Fit: GTR's or whatever an RB26 is in, or any turbo car or Nissan's

Location: Brisbane, but will send at buyers expense

Contact: PM

Comments: none.

Sorry, my mistake the wheelnuts aren't quite so light weight, they are lighter than normal, but not like RAYS or anything, however they are a full set, with lock nuts.....drop to $20 for the full set.

Knob looks like this one

greddy_shift_knob_blue.jpg

RB26 covers are sold and gone.

The wheels nuts/locknuts are not the lightweight ones I thought they were, they are just a basic set of black nuts, they are lighter than normal, but nothing like the lightweight RAYS nuts which are rediculously light....no pics, they look like wheelnuts, and I have reduced the price to $20 for the set.

Covers are sold.

Edited by QIK_GTR
The wheels nuts/locknuts are not the lightweight ones I thought they were, they are just a basic set of black nuts, they are lighter than normal, but nothing like the lightweight RAYS nuts which are rediculously light....no pics, they look like wheelnuts, and I have reduced the price to $20 for the set.

ill take them. pls pm me your pickup details...

pics plz

pics of what? The boost guage or the clears or both? The boost guage is a regular black faced, Apexi EL2 boost guage and the clear fronts are just clear version of the stock orange ones, I can get pics if you really require them to see what they look like.

Have you got the black indicator plate for the standard GTR front bar?

No, they are just the clear lenses/housing that fits into the black plate.

Guage is sold.

Clear front indicator lenses/assemblies left to go, someone must want these, ditch the ugly, old, mid 90's orange things and go clear.......

Lenses $120 posted, want them gone, last thing to sell, these are genuine Nissan clears, worth more than double my asking price!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...