Jump to content
SAU Community

Oxidation

Robbo_05
 Share

Recommended Posts

smoothV35 Explorer

smoothV35

Posted
Posted

To everyone with the rain marks that seem to be permanently stuck on the windows, I have found the fix :down:

Just use Autosol Metal Polish, a cloth, and lots of hard work, its that simple.

Just make sure you apply a fair amount of pressure when rubbing the compound in, you may have to apply it twice to get any little bits you might have missed, and hey presto, new windows!

smoothV35 Explorer

smoothV35

Posted
Posted

Hi Robbo05,

I bought it from my local Supercheap Auto so I could get rid of the staining on the chrome parts. It worked perfectly on the chrome as I expected, but that got me thinking that maybe the staining was on the surface of the glass, not acid rain that had eaten into the glass as was suggested by some people.

Me being the type that likes to experiment with things, I tried it on the glass in an inconspicuous area and was ecstatic to find that it actually works. :happy: Because I was seriously starting to consider buying replacement glass, haha.

Like I said though, rub with a decent amount of pressure and concentrate on one small area at a time. Rubbing up and down works best as opposed to a swirling motion.

There may be an easier way to rub it off, like with one of those electric orbital polishers, but I don't have one of those and I'm happy to just keep chipping away at it myself.

Last night I also used it to clean the yellowing off my headlights, haha, seems like it polishes more than just metal :)

If you have any other questions let me know.

Stephen Thorpe Proficient

Stephen Thorpe

Posted
Posted
Theres no need to worry about how hard you push, the Autosol compound does not eat glass.

And it doesn't work 'fairly well', it works, full stop.

That's good, I was mearly mentioning that Autosol is an abrasive type of product. Would hate to see someone forget that...

Clikar23 Apprentice

Clikar23

Posted
Posted
That's good, I was mearly mentioning that Autosol is an abrasive type of product. Would hate to see someone forget that...

Can confirm that this works a treat. Just did the chrome around the door windows and then the rear window. Took about 15 minutes and my arm feels it so I'll do the rest later. :)

Used Maquires window cleaner to clean off the polish residue. Perfect!! :P:happy:

n15m0 Grand Master

n15m0

Posted
Posted

tried it today. Didn't really work that well for me. The stains are slightly less obvious but still very visible. Applied half a dozen times per window,used up approx 1/4 of a brand new tube of autosol. Maybe my stains are particularly tougher...

Anyone else have success?

n15m0 Grand Master

n15m0

Posted
Posted
Hey N15M0,

I'd be happy to show you in person if its convenient, let me know.

Whereabouts in Brissie are you in? I'm on the Southside,Runcorn. That would be great maybe on the weekend or something. Maybe get Robbo05 (mark) to come along to so we can have a stain removal session lol.

smoothV35 Explorer

smoothV35

Posted
Posted

I live northside so would be willing to meet you halfway on the weekend. However, before we get to that stage, lets make sure you guys are doing it right :down:

Using a dollop about the size of a 5 cent piece and a rough textured cloth, rub in an up and down motion, no swirls, using your index and middle finger with pretty much your whole weight against it. Takes about 20 seconds of rubbing in a spot about 15cm high by 3cm wide to see the results. Its not an easy thing to do, thats for sure.

The user Clikar23 was successful and if you ask him, I bet he tells you his arm is sore after doing just one window, so if yours isn't then you are definitely not doing it right, haha

Give that a shot and let me know how it pans out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • aneesr34
      Stock Airbox and Snorkle for RWC - VIC west

      By aneesr34 · Posted

      Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Dose Pipe Sutututu
      EFR7670 exhaust housing selection RB26

      By Dose Pipe Sutututu · Posted

      Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • GTSBoy
      EFR7670 exhaust housing selection RB26

      By GTSBoy · Posted

      People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • r32-25t
      EFR7670 exhaust housing selection RB26

      By r32-25t · Posted

      1.05 you’ve gotta let it breath 
×
×
  • Create New...