Jump to content
SAU Community

Fs: 18x8.5 +30 Rays Gold Volk Racing Forged Ce28n+tyres

Skyalwaysblue
 Share

Recommended Posts

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
Posted (edited)

Item: Genuine 18X 8.5 +30 offset GOLD VOLK RACING CE28N FORGED RIMS + TYRES

PCD: 114.3X5 and 100x5 multi stud pattern. They are forged rims from RAY Volk racing series. Their weight is 17.3 lbs about 6.45kg per rim which is lightweight and super strong!

Detail of the tyres:

Tyres are BRIDGESTONE RE750 DOT approved, unfortunately one tyre sidewall got punctured a few weeks ago and I replaced by Yokohama A drive R1.

So that's 3 X 235/40/18 BRIDGETONE RE750 TYRES 85% thread left, 1X YOHOHAMA A DRIVE R1 95% thread left.

Condition:

Very clean except some light wear and tear in stud areas(caused by removing wheel nuts)which is very normal, center and valve stem caps are not included in this sale due to stolen by some boring low life idiots. Volk racing and CE28N and wheel spec and factory quality guarantee stickers still there, except one CE28N sticker came off due to heavy brake dust.

Price: $4500 ono

To Fit: (What car)It will suit EVO 6 to EVO 10 without rubbing,rollling and spacers. Also can be used for Nissan GTR 32,33,34 etc.

Location:Melbourne

Contact:CE28N rims and tyres combo can be inspected by appointment for Melbourne buyers. Please do some homework and research for the price of rims and tyres before making your offer.

Send your offer to me via PM

Comments:Selling due to loss of license for 6 months will get it back until 2009, I will be travelling overseas at end of this month.

R02.jpg

w1-1.jpg

w2-1.jpg

w3.jpg

YR1.jpg

099.jpg

087.jpg

b1.jpg

103.jpg

Pics didnt do the justice! :)

Edited by Skyalwaysblue
femno Grand Master

femno

Posted
Posted

yeah considering theres no centre caps, a sticker missing, and skinny 8.5 width its a bit much...might sell if you drop a little.

also that offset isnt ideal for gtrs esp being only 8.5 wide just so you know.

bump for a tops wheel anyway.

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
  • Author
Posted
yeah considering theres no centre caps, a sticker missing, and skinny 8.5 width its a bit much...might sell if you drop a little.

also that offset isnt ideal for gtrs esp being only 8.5 wide just so you know.

bump for a tops wheel anyway.

Hi mate

I dont mind about your rude reply, however I hope you could show some respect to the forum members :(

Genuine buyer will contact me via PM so there is no need you tell me what to do.

Good or not buyer will justify that, if buyer after center caps and one missing sticker I can organize that thats not the problem. I can get new one from RAYS JAPAN.

Please keep the for sale thread clean! Thank you! :)

Marko R1 Grand Master

Marko R1

Posted
Posted
yeah considering theres no centre caps, a sticker missing, and skinny 8.5 width its a bit much...might sell if you drop a little.

also that offset isnt ideal for gtrs esp being only 8.5 wide just so you know.

bump for a tops wheel anyway.

i dont think femno is being rude, just upfront & honest that this particular offset will not work on a gtr as i recently bought a set for my gtr

better ppl know what to expect when buying goods

nice wheels though, 1 of my favourites :banana:

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
  • Author
Posted
i dont think femno is being rude, just upfront & honest that this particular offset will not work on a gtr as i recently bought a set for my gtr

better ppl know what to expect when buying goods

nice wheels though, 1 of my favourites :banana:

It work perfectly on GTR if you have a JDM Hyper Rev tuning magazine you can check it out. will suit 245,255 width tyres as well. Pls do not reply if you are not interested.

Thank you!

Marko R1 Grand Master

Marko R1

Posted
Posted

yes it would work on a gtr but will sit in 8-15mm more than it should in this is not even taking into account the width which is less than recommended 9.5-10"

i.e. optimal offset for r32gtr for example is +15 or +22, with r33/r34gtr the offset would need to be even more aggressive (each to their own i guess)

no harm intended :banana:

WARLORD Veteran

WARLORD

Posted
Posted
yes it would work on a gtr but will sit in 8-15mm more than it should in this is not even taking into account the width which is less than recommended 9.5-10"

i.e. optimal offset for r32gtr for example is +15 or +22, with r33/r34gtr the offset would need to be even more aggressive (each to their own i guess)

no harm intended :banana:

i second that.

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
  • Author
Posted (edited)
yes it would work on a gtr but will sit in 8-15mm more than it should in this is not even taking into account the width which is less than recommended 9.5-10"

i.e. optimal offset for r32gtr for example is +15 or +22, with r33/r34gtr the offset would need to be even more aggressive (each to their own i guess)

no harm intended :P

If you wanna discuss about offset issue pls start your own thread.If you are not intend to buy no spamming!Thank you!

Edited by Skyalwaysblue

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • joshuaho96
      UniClutch

      By joshuaho96 · Posted

      All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • MBS206
      Who has a Infiniti Q60, Q50 (V37)?

      By MBS206 · Posted

      That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Piggaz
      UniClutch

      By Piggaz · Posted

      Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...