Jump to content
SAU Community

Fs: 18x8.5 +30 Rays Gold Volk Racing Forged Ce28n+tyres

Skyalwaysblue
 Share

Recommended Posts

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
Posted (edited)

Item: Genuine 18X 8.5 +30 offset GOLD VOLK RACING CE28N FORGED RIMS + TYRES

PCD: 114.3X5 and 100x5 multi stud pattern. They are forged rims from RAY Volk racing series. Their weight is 17.3 lbs about 6.45kg per rim which is lightweight and super strong!

Detail of the tyres:

Tyres are BRIDGESTONE RE750 DOT approved, unfortunately one tyre sidewall got punctured a few weeks ago and I replaced by Yokohama A drive R1.

So that's 3 X 235/40/18 BRIDGETONE RE750 TYRES 85% thread left, 1X YOHOHAMA A DRIVE R1 95% thread left.

Condition:

Very clean except some light wear and tear in stud areas(caused by removing wheel nuts)which is very normal, center and valve stem caps are not included in this sale due to stolen by some boring low life idiots. Volk racing and CE28N and wheel spec and factory quality guarantee stickers still there, except one CE28N sticker came off due to heavy brake dust.

Price: $4500 ono

To Fit: (What car)It will suit EVO 6 to EVO 10 without rubbing,rollling and spacers. Also can be used for Nissan GTR 32,33,34 etc.

Location:Melbourne

Contact:CE28N rims and tyres combo can be inspected by appointment for Melbourne buyers. Please do some homework and research for the price of rims and tyres before making your offer.

Send your offer to me via PM

Comments:Selling due to loss of license for 6 months will get it back until 2009, I will be travelling overseas at end of this month.

R02.jpg

w1-1.jpg

w2-1.jpg

w3.jpg

YR1.jpg

099.jpg

087.jpg

b1.jpg

103.jpg

Pics didnt do the justice! :)

Edited by Skyalwaysblue
femno Grand Master

femno

Posted
Posted

yeah considering theres no centre caps, a sticker missing, and skinny 8.5 width its a bit much...might sell if you drop a little.

also that offset isnt ideal for gtrs esp being only 8.5 wide just so you know.

bump for a tops wheel anyway.

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
  • Author
Posted
yeah considering theres no centre caps, a sticker missing, and skinny 8.5 width its a bit much...might sell if you drop a little.

also that offset isnt ideal for gtrs esp being only 8.5 wide just so you know.

bump for a tops wheel anyway.

Hi mate

I dont mind about your rude reply, however I hope you could show some respect to the forum members :(

Genuine buyer will contact me via PM so there is no need you tell me what to do.

Good or not buyer will justify that, if buyer after center caps and one missing sticker I can organize that thats not the problem. I can get new one from RAYS JAPAN.

Please keep the for sale thread clean! Thank you! :)

Marko R1 Grand Master

Marko R1

Posted
Posted
yeah considering theres no centre caps, a sticker missing, and skinny 8.5 width its a bit much...might sell if you drop a little.

also that offset isnt ideal for gtrs esp being only 8.5 wide just so you know.

bump for a tops wheel anyway.

i dont think femno is being rude, just upfront & honest that this particular offset will not work on a gtr as i recently bought a set for my gtr

better ppl know what to expect when buying goods

nice wheels though, 1 of my favourites :banana:

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
  • Author
Posted
i dont think femno is being rude, just upfront & honest that this particular offset will not work on a gtr as i recently bought a set for my gtr

better ppl know what to expect when buying goods

nice wheels though, 1 of my favourites :banana:

It work perfectly on GTR if you have a JDM Hyper Rev tuning magazine you can check it out. will suit 245,255 width tyres as well. Pls do not reply if you are not interested.

Thank you!

Marko R1 Grand Master

Marko R1

Posted
Posted

yes it would work on a gtr but will sit in 8-15mm more than it should in this is not even taking into account the width which is less than recommended 9.5-10"

i.e. optimal offset for r32gtr for example is +15 or +22, with r33/r34gtr the offset would need to be even more aggressive (each to their own i guess)

no harm intended :banana:

WARLORD Veteran

WARLORD

Posted
Posted
yes it would work on a gtr but will sit in 8-15mm more than it should in this is not even taking into account the width which is less than recommended 9.5-10"

i.e. optimal offset for r32gtr for example is +15 or +22, with r33/r34gtr the offset would need to be even more aggressive (each to their own i guess)

no harm intended :banana:

i second that.

Skyalwaysblue Enthusiast

Skyalwaysblue

Posted
  • Author
Posted (edited)
yes it would work on a gtr but will sit in 8-15mm more than it should in this is not even taking into account the width which is less than recommended 9.5-10"

i.e. optimal offset for r32gtr for example is +15 or +22, with r33/r34gtr the offset would need to be even more aggressive (each to their own i guess)

no harm intended :P

If you wanna discuss about offset issue pls start your own thread.If you are not intend to buy no spamming!Thank you!

Edited by Skyalwaysblue

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...