Jump to content
SAU Community

Recommended Posts

Hey all,

I'm currently looking seriously at 3 skylines from my mates brother's import dealership. All of them are series II r33 turbos, but two of them are modded, and one is completely standard. I'm thinking that I will get the standard one since it is slightly cheaper and I'm not really extremely keen on the mods which have been done to the other two cars anyway.

Here is the standard one:

http://netevolution.com.au/northshoreprest...tock/ecr592.JPG

And here are the two modded ones:

http://netevolution.com.au/northshoreprest...tock/ecr175.JPG

http://netevolution.com.au/northshoreprest...tock/ECR153.JPG

Now, a few of my mates have been telling me to consider getting the modded ones just cuz even though I may not like the mods, I can always sell them, and put the cash towards mods I like. All three cars are around the 27k$ with the standard one being a few grand less. Another inticing thing about the standard one is that it will be the first to be inspected under the new import system, so it should be the best condition out of the three (or so I'm told... that could be just a sales pitch). Anyway I'd like to hear your opinions!

Insurance is going to be a bitch. I'm turning 18 in 2 months and am yet to get my Ps. My dad reckons I should just get third party and get a tracking device in case it gets stolen. Are there any fool proof (or close to fool proof) security systems? Any advice with security or insurance would be much appreciated!

Cheers people!

Link to comment
https://www.sau.com.au/forums/topic/23970-decisions/
Share on other sites

OK a couple of things to think about.

Once all the modded cars have been sold from the lots, the price of modded cars will raise -alot. It costs a bloody fortune to mod a car.

Take for example the front bar on the grey car, looks like a BN sports(just a guess, not too sure)??? To get a genuine one into aust would cost you 1.5k+, the wheels, second hand in good condition, 2-2.5K. Looks like it has a FMIC? 2k new, 1.2 second hand. (ideal if you want to turn up the boost a bit) Probably also has a cat back system, add another 1k. Probalby also has suspension done? 1-1.5k Thats about 8.5k in mods. What else is done? you are porbably looking at a car that is putting down 180+rwkw, pay a few hundred dollars more for a SAFC and you could well have 200+rwks (I like the front bar too, if you buy the car and want to sell it, I'll give you $500 and pay shipping to adelaide) The best part is that the mods are done, so you wont be voiding any warranty, which modding a stock car would do.

Now how attractive is the stocker, which will be the same as every other stocker on the road, will loose resale value quicker than a modded car, and you will probably want to start modding one day anyways?

Try getting a list of mods and post it up, this will help give us a better idea of what value you are getting, but be quick, by the looks of the silver car with the aftermarket bar and the 3 spoke wheels, it wont last long.

Some food for thought.

Link to comment
https://www.sau.com.au/forums/topic/23970-decisions/#findComment-512839
Share on other sites

id go the stocko model, just coz id prefer to do the mods myself and you know what mods are done then;

im a believer in stockos being less thrashed than worked models

i got my whale stocko and couldnt have been happier with it

ill do my own mods when i get around to it, still not bored with stock performance

Link to comment
https://www.sau.com.au/forums/topic/23970-decisions/#findComment-513433
Share on other sites

well as you said insurance is a problem for you and a moded skyline will be even more expensive to insure.

i also believe stock cars havent been thrashed as much, and are usually cheaper and attract less attention from pricks who wanna damage or steal your car...

plus you will personalize your car to your taste if you feel the need for mods in the future....

Link to comment
https://www.sau.com.au/forums/topic/23970-decisions/#findComment-514449
Share on other sites

Get the red one, !! i have a red one, and in series two, i have only ever seen 2 other red cars! The colour is brighter than the series one colour, it looks really good in real life.

BUT red fades fast. Best if u can keep it in the garage. The mirrors on mine are really faded and u can see that the paint is far from new.

Heres a pic to my car in the shade, and in the sun, so u can get a good idea of the colour...

skyline.jpg

skyline1.jpg

Link to comment
https://www.sau.com.au/forums/topic/23970-decisions/#findComment-514498
Share on other sites

Originally posted by Jetdat

well as you said insurance is a problem for you and a moded skyline will be even more expensive to insure.

i also believe stock cars havent been thrashed as much, and are usually cheaper and attract less attention from pricks who wanna damage or steal your car...

plus you will personalize your car to your taste if you feel the need for mods in the future....

If you want a car that is cheap to insure and hasnt been thrashed, wont attract attention.....buy a gemini, or a stock commodore

You may personalise your car if you have the money.

You dont buy a skyline to own a car that wont attract attention, wont get thrashed (thats what they are built for) and you definately dont buy a skyline if you want cheap insurance.

You could build a fully customised 12 sec VH commodore for under 10K, cos they are cheap to mod. A skyline costs a bloody fortune to mod, and if you dont have the money buy it done for you and you will save thousands of dollars.

Link to comment
https://www.sau.com.au/forums/topic/23970-decisions/#findComment-515909
Share on other sites

Originally posted by Munky

How about performance wise. A few people have suggested that I won't be able to legally drive this car because of its power. Is this true?

What an absolute load of hot c0ck.

Some people it would seem really speak crap. If it was illegal, I doubt very much the car would be in the yard.

If the car complies with ADRs, its legal - that simple. Power only really becomes an issue when you start putting on larger turbos, or increasing capacity of the engine. If that were the case you would have to get an engineers report to say the vehicle has the braking capacity and chassis rigidity to handle the power, as well as emissions testing etc and then it would be legal.

There is a guy selling an S13 silvia with an RB25 and twin 2530s, with all the fruit to support its 400rwhp(+?) - and it has an ADR compliance plate for all its mods, and legally registered in NSW.

Check the for sale section, his nick is Nismo King.

Seriously, everything else being equal, but the nicest car with mods. If you dont like the mods, post up in the swap section, and you will be able to make some dollars. But best way, take them for a drive, whichever one drives the best, buy it.

Link to comment
https://www.sau.com.au/forums/topic/23970-decisions/#findComment-516600
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...