Jump to content
SAU Community

Recommended Posts

Guys just found out the serial number on my turbo i am still unsure of housing size think its .63 and a/r .70

serial number 700177 - 5014

ive tried to google search it and find it on the garret website but i cant get hard evidence on what it actually is??

can anyone help

i wanna compare it too a 3071r which im thinking of changing too on my rb20

im chasing 260rwkw full boost at 5000

at the moment im getting 260rwkw but full boost at 5500 - 6000

how can i compare the two??

Link to comment
https://www.sau.com.au/forums/topic/240305-garret-700177-5014-on-rb20/
Share on other sites

That 700177-5014 cartrige is the one used in GT3082R (GT3040R in oldspeak) .

They are basically the GT3582R's compressor and housing on the smaller GT30 hot side .

Garrett don't show them on their website from memory and many people (inc me) think they have too much compressor for the turbine size but having said that some still like them .

GT3071R compressor is a 71.1mm 56 trim GT wheel . GT3082R's compressor is an 82mm 56 trim GT wheel .

For an RB20 a 44 lb (air pumping wise) compressor should be far more suitable than 62 lb one and noticably more responsive .

Possibly too expensive but a GTRS (HKS spec GT2871R 52T) is probably better again on a roadie or even an RB spec (T3 flanged) GT2530 .

Cheers A .

Thats a little under 350 Hp and at the crank I think its possible - provided the engine breathes well enough to do it .

Do somes searches on GTRS's and RB20's , Roy had some info on how these turbos stacked up against his Mitsy TD turbo and for an integral gate turbo they did reasonably well .

For me it'd be either GCG Hi Flow or 2530 or GTRS based on what I could afford to spend .

Cheers A .

  • 7 years later...

That 700177-5014 cartrige is the one used in GT3082R (GT3040R in oldspeak) .

They are basically the GT3582R's compressor and housing on the smaller GT30 hot side .

Garrett don't show them on their website from memory and many people (inc me) think they have too much compressor for the turbine size but having said that some still like them .

GT3071R compressor is a 71.1mm 56 trim GT wheel . GT3082R's compressor is an 82mm 56 trim GT wheel .

For an RB20 a 44 lb (air pumping wise) compressor should be far more suitable than 62 lb one and noticably more responsive .

Possibly too expensive but a GTRS (HKS spec GT2871R 52T) is probably better again on a roadie or even an RB spec (T3 flanged) GT2530 .

Cheers A .

I recently put one of these turbos on my Sr (700177-5014)

With 270 cams, .64 rear housing i had full boost of 17psi by 4900/5000Rpm.

Given that post above info (cheers mate) I have a feeling i'm not even into the turbos efficiency range

I'm not terribly fond of the lag, so im looking for a smaller turbo and i think ill stick this one on the 3l.

anyway, bump for super old post.

+ found some info on the turbo here : http://www.sonicperformance.com.au/700177_dash_5014/Garrett-GT3082RL-CHRA/pd.php

Old thread revamp .

The thing is that the Garrett version of the GT3082R , once known as the GT3040R , use a larger trim version of the 82mm GT40 compressor than the HKS spec one did ie 56T for the Garrett marketed one and 50T for the HKS spec one . Both are made by Garrett but HKS paid for the development of their dialled in version and had exclusive rights to it for a few years .

Imo any GT30 based turbo isn't exactly small for a 2 Litre four cylinder but with Garrett its a big jump down from GT30 to GT28 turbines and turbine housings . I believe the few band aids like the cropped GT30 turbine are a crock and only recently proper turbine housings appeared for them - but in limited applications ie no T3 flanged integral waste gate option . I reckon this is why people go to Hypergear and TD series turbos because they bridge the gap Garrett isn't willing to .

For the record I had a HKS GTRS on my GTS25T and it made 271 RWKWs (E70 juice) on its knees and with falling boost pressure .

A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...