Jump to content
SAU Community

Xr6t Fmic

TTT

By TTT,
in Classifieds

 Share

Recommended Posts

TTT Grand Master

TTT

Posted
Posted

I have a stock XR6T fmic for sale.

this can be used in skylines using stock piping with a few custom pipes to go from the standard cooler location to the front location.

cooler already has stock endtanks which have both pointing to the correct direction.

$150

brisbane.

Will measure and take pics tonight and post details tomorrow.

Link to comment
https://www.sau.com.au/forums/topic/240308-xr6t-fmic/
Share on other sites
TTT Grand Master

TTT

Posted
  • Author
Posted
I have a stock XR6T fmic for sale.

this can be used in skylines using stock piping with a few custom pipes to go from the standard cooler location to the front location.

cooler already has stock endtanks which have both pointing to the correct direction.

$150

brisbane.

Will measure and take pics tonight and post details tomorrow.

pics up..

Core details:

370mm wide

170mm tall

55mm thick

End Tanks are 80mm wide at the widest point (so the cooler is about 520mm wide at the widest point)

the inlet and outlet on the cooler are 50mm Internal diameter and 60mm external diameter

post-343-1224413084_thumb.jpg

post-343-1224413102_thumb.jpg

post-343-1224413119_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/240308-xr6t-fmic/#findComment-4205496
Share on other sites
TTT Grand Master

TTT

Posted
  • Author
Posted

no interest in a cheap FMIC option.

just incase you do not know about them

stock xr6t (the model this came from) is 240kw at the engine.

this cooler is usually upgraded as part of Stage 3 mods which is usually when they want MORE than 280-290rwkw.

the size will keep lag to a minimum (less than you will get with the usual 600x300 cooler).

and using the stock piping means no cutting holes in the engine bay.

being 170mm tall also means no chopping of the REO bar..

essentially making this LEGAL.

Link to comment
https://www.sau.com.au/forums/topic/240308-xr6t-fmic/#findComment-4216640
Share on other sites
TTT Grand Master

TTT

Posted
  • Author
Posted

nah... I can't find a place near by that will do the work for me on a weekend and I use the car every other day.

I'll probably sell the car soon as it's being wasted on me.

so I've got this and a set of stockers with new tyres I want to get rid of.

and a pod filter with adapter.

I'll look to sell the car in the new year.

Link to comment
https://www.sau.com.au/forums/topic/240308-xr6t-fmic/#findComment-4223084
Share on other sites
  • 2 weeks later...
TTT Grand Master

TTT

Posted
  • Author
Posted

more than the stock cooler of course.

stock cooler holds say X amount of air.

the 600x300 holds like 10 times as much.

means it takes longer to fill

this will be seen in the way of lag (or throttle response.. what ever you want to label it)

Link to comment
https://www.sau.com.au/forums/topic/240308-xr6t-fmic/#findComment-4255290
Share on other sites
33driver Rising Star

33driver

Posted
Posted
more than the stock cooler of course.

stock cooler holds say X amount of air.

the 600x300 holds like 10 times as much.

means it takes longer to fill

this will be seen in the way of lag (or throttle response.. what ever you want to label it)

Hey mate,

Where abouts are you located?

Cheers,

Matt

Link to comment
https://www.sau.com.au/forums/topic/240308-xr6t-fmic/#findComment-4257624
Share on other sites
  • 2 weeks later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • thatjawncrazy
      Another "where do these lines and plugs go" RB25DET question

      By thatjawncrazy · Posted

      GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Stringycheese
      Blue slip

      By Stringycheese · Posted

      Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • PranK
      Blue slip

      By PranK · Posted

      Should have asked what is the car?
    • PranK
      Blue slip

      By PranK · Posted

      I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...