Jump to content
SAU Community

Recommended Posts

  • Replies 143
  • Created
  • Last Reply

Top Posters In This Topic

looks the goods lee

mid range looks good! :blink:

afr's are perfect, wouldn't expect any less from Martin.

Feels strong from 3500 onwards exactly what i was hoping for. Martin done a top job.

This truly is an exceptional setup, and something I would do to my own GTS-t if I had one :blink:

251rwkw on our Mainline would be somewhere close to 280-290rwkw on the old one it replaced

All this with a stock airbox (only K&N filter panel) and a truly stealthy install. Very, very nice, and should be well capable of an 11 second pass when AIR reopens :blink:

This truly is an exceptional setup, and something I would do to my own GTS-t if I had one :blink:

251rwkw on our Mainline would be somewhere close to 280-290rwkw on the old one it replaced

All this with a stock airbox (only K&N filter panel) and a truly stealthy install. Very, very nice, and should be well capable of an 11 second pass when AIR reopens :blink:

Cheers Martin i was purposely heading down the stealth install route the way us enthusiasts are hunted down these days by the boys in blue. Open the bonnet and nothing looks too out of place to the untrained eye. Definately very happy with the way everything has turned out thats for sure (back pocket a bit lighter for it but).

I would be happy to crack a high 12 some day to me thats a quick street car. Cheers for all your help in getting it to the way it is now.

haha, just razzing ya.........looks like a very good effort.......and welds don't have to be pretty, just have good penetration (well that's what my Dad says, he's a boilermaker)

Ahh, so many great potential one-liners in this thread, I'm spoilt for choice!

Nothing wrong with some good penetration... boom-tish!

And Joel, ignore Pete, I think your Mum doesn't a fine job with a welder :blink:

Now, back to being serious for a moment.

In my humble opinion, when chasing power levels at or above the 300rwkw mark using the RB25DET, it pays to bypass the internal wastegate options and go straight for a correctly sized external gate and piping to suit. In the long run you are more likely to get the result you're after with less hassle, and in some cases you'll actually save money that would have been spent stuffing around trying to fix boost control/creep issues.

I learnt the above the hard way.

So, would anyone like to buy my internal gate Turbonetics 0.63 T3 Stage 5 housing with enlarged internal gate outlet? It's good for 350rwkw on an RB25DET... and does a reasonable job of controlling boost :blink:

Ryan, it sounds like your Garrett (I'm assuming Garrett - can't recall exactly) 0.63 has the same response as my 0.63 Turbonetics - they're much the same design, so it's not unusual I guess.

Lee, nice result, mate. Got to be happy with that power and response. Upgrade the cams, add some more boost and there's a little bit left in that combo' still to come - up to 280rwkw on the same dyno.

If I had a dollar for every time I've heard of someone having to redo part or all of a new turbo set-up, I'd have at least $2 so far... in this thread. You and I, Ryan :D

We tend to start out thinking we can save a few dollars by not upgrading a certain part (i.e external gate in this case) only to end up with an overall result that falls short of our expectations. We then go on to spend more money, trying to get a better result, only to end up forking out for the part that we skipped in the first place.

You've got to laugh though, because we all do it at some point or another.

That's the spirit :D And much the same way I feel having learnt the hard way too.

I think a GT30 compressor combo' coupled with 0.63 external gate rear would be just fine. It will be responsive, will still make solid top end power, and with the external gate will hold boost without any creep issues. I wouldn't expect big 300+ numbers though - the GT3082 would be the choice for that if the latter is your ultimate goal.

Ryan..

The GT3076r with the .63 IW rears still boost creep.

I would expect the GT3082 to be worse as the comp wheel is larger and pushes more air per revolution; in turn more exhaust gas has to bypass the turbine wheel.

But why the GT3082? You really can't make use of the comp wheel unless your start playing with better fuel and at the very least a .82 preferably 1.06 turbine housing.

The .82 rears appear not to experience creep issues. In my case and also another mate (Lithium here on SAU) who I helped out to get his .82 IW together, both of ours are fine - no creep.

The .82 IW GT3076 on the rb25 comes on strong around 4000rpm.

Dangerman4 who runs an the GT35r .82 IW has zero issues with boost creep but in the past similar boost drop issue I am having. He remedied his boost issues by fitting a stiffer actuator.

His 1bar actuator was fairly useless, then jumped to 18psi which allowed up to 24psi now soon he's fitting 24-25psi actuator for god know what boost levels lol.

Lee, nice result, mate. Got to be happy with that power and response. Upgrade the cams, add some more boost and there's a little bit left in that combo' still to come - up to 280rwkw on the same dyno.

Thanks Whatsis i'm happy thats for sure. Cams will definately be on the cards down the track more so for mid range than anything else. Nearly all the parts were bought off this forum and definately all the research has been from SAU so i guess i have all you blokes to thank :D . I originally was going to go with a 2835 but future plans are a forged RB30 bottom end (when the 25 starts to get tired or throws a leg out of bed which ever comes first) so the 3037 should be good for 300rwkw give or take.

my gt3582r-iw dump design,

on a highmount ETM manifold.

lives on 24psi / 320rwkws daily with no boost issues

Please tell me the motor is built lol

I've decided to Mod my manifold to house an external gate, keeping the .63 rear with the gt35r from cover and wheel...I really like the power delivery with this one. I can flat foot it off the line in first and it accelerated enough just before it breaks traction and that's what i wanted.

Thanks for your info whatsisname, Ill keep you posted on how it all goes :domokun:

QUOTE (Martin Donnon @ 11 Nov 2008, 03:46 PM) post_snapback.gifThis truly is an exceptional setup, and something I would do to my own GTS-t if I had one :(

251rwkw on our Mainline would be somewhere close to 280-290rwkw on the old one it replaced

All this with a stock airbox (only K&N filter panel) and a truly stealthy install. Very, very nice, and should be well capable of an 11 second pass when AIR reopens ;)

I'm looking to run 11's aswell in my ER34... I may have missed it but, is the 3037s being installed low mount?

I was looking to run either GT-rs or 2835, will i get approx. same/enough power to run into 11's?

Thanks

QUOTE (Martin Donnon @ 11 Nov 2008, 03:46 PM) post_snapback.gifThis truly is an exceptional setup, and something I would do to my own GTS-t if I had one :(

251rwkw on our Mainline would be somewhere close to 280-290rwkw on the old one it replaced

All this with a stock airbox (only K&N filter panel) and a truly stealthy install. Very, very nice, and should be well capable of an 11 second pass when AIR reopens ;)

I'm looking to run 11's aswell in my ER34... I may have missed it but, is the 3037s being installed low mount?

I was looking to run either GT-rs or 2835, will i get approx. same/enough power to run into 11's?

Thanks

3037 S uses standard exhaust manifold with custom HKS dump as will the 2835.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
    • Off the back of feedback we have decided to mix up this next Motorkhana at Avalon to have some targeted skills practice for beginners to advanced. Saturday 6th September 2025 8:30am Capped 26 entries Standard Entry Fee: $89 Members Entry Fee: $55 (SAU Victoria Only) Entries Close: Friday 5th February  Where: 55 beach road Avalon. https://maps.app.goo.gl/HNUE3EuNue3sJxh38 Entries: Limited to 26 entrants (Passengers allowed over the age of 14 with a signed disclaimer and same safety gear) Disclaimer: Download  Please electronically sign and email to [email protected] or print and hand in and Driver Sign In. To compete in this event you will require A valid  AASA General Speed licence or (Day license via the AASA Website for $50) MA Licenses are no longer accepted by AASA https://aasa.com.au/  A helmet, long sleeve clothing and a 1KG mounted fire extinguisher recommended (But not Mandatory). Further details within Supp Regs on the enty link. Entry Link > https://www.sauvic.com.au/entry/deca/20250906 You can bring and have a passenger in the car but they need to comply to the same safety and clothing as driver. Bring your car and get to battle others, win, lose or draw. I can guarantee you will have lots of fun. Any questions email [email protected] Entry List: 1.Anna S 2. Luke S 3. Jesse Givens-Lamb 4. Luca Stamatescu 5. Madeleine Stamatescu    
    • Wanna rewrite all of that in, say, 2 or 3 separate sentences, so that we can read it?
×
×
  • Create New...