Jump to content
SAU Community

Recommended Posts

I am unsure if I have Z32 AFM's or not. I have spent the last 3 hours searching and getting info etc. but I have something a bit strange and a bit different...

Both my AFM's have orange stickers, so you would assume they are Z32 items, however, the part numbers are different to what is stated on these forums.

It should read 22680-30P00 A36-000 N62 for Z32.

Mine is 22680-05U00 A36-000-J70

Standard is 22680-02U00

Now I'm confused as to what I have ;) and yes I read the number right, it is a 5 not a 2.

I would say they are from the mods on the car from Japan and from the stickers, but the part number throws me.

Car is a 1994 R32 GTR VSpec II, with Mines ECU, Full Kakimoto exhaust and still unsure if after market turbos or not (I can't see the numbers on them as not got underneath yet)

Everyone I have taken in the car says it pulls harder than a normal GTR so I dunno.

Any help?

Link to comment
https://www.sau.com.au/forums/topic/240793-another-z32-afm-thread/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...