Jump to content
SAU Community

Recommended Posts

Hello all,

I have a r33 gts-t auto, and would like to have coverted to a manual. Im looking around Perth and have been quoted $4,000. Does any know if it can be done for less than that, and if so where.

Alternatively, how much rwkw can one use on these cars without destroying the standard auto.

Any advice will ge greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/241220-r33-transmission-conversion/
Share on other sites

depends on how many kms it has travelled and how you drive it will reflect your autobox. ive changed mine at 105000kms and was a cheaper alternative then converting to manual. if you intend to keep the car for long then convert it other wise its worthless.

other than that i wouldnt push mine over 200rwkw if you havnt done anything to the box (shiftkit, bigger transcooler etc)

Well $1500 for the box initially and then obviously everything else that goes with it as well. Including:

Master cylinder, slave cylinder, pedal box, manual ecu, clutch flywheel, tailshaft, speedo, plus anything else and all the labour involved as well. I wouldnt be surprised if it was worth that much. Did the quote include a brand new clutch as well? I would think anywhere between $3-3.5k would be a reasonable amount to charge.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...