Jump to content
SAU Community

Recommended Posts

Hey guys, for sale i have pretty much all parts from a RB26dett 32GTR engine. The motor has been pulled apart and fully inspected due to a spun bottom end bearing.

I have all parts besides the intake.

RB26dett Block has been pulled down (rods, rings, pistons and crank are out) My mechanic has advised me that the block will beed honing, crank grinding, and one of the pistons and rods are damaged and will need replacing. All is fixable (this can be confirmed by my mechanic) so will be perfect for someone wanting a forged rebuild project. - $500 for all.

RB26dett Head is in perfect working condition (no manifolds, turbos or intake) - $offers

RB26dett R32 Standard Turbos - both in good working condition min play - $300 for both

RB26dett Sump - no diff $300

RB26dett Alternator - $150

RB26dett Starter Motor - $150

HKS SSQ Bov's - $120 for both

These are the main parts i know i have and can list so far so keep an eye on the thread as i add more to it, or ask for other parts and ill get back to you.

Please bare with me for other parts as im not so smart with whats what lol i have a friend helping me out but everything needs to go asap so throw me some prices and take it.

Parts are available for pickup from Sydney can arrange postage at your expense. No parts are sold until i have the money so first in best dressed guys, cheers! Pics to come hopefully tonight...

PM me or contact on 0420969487

Link to comment
https://www.sau.com.au/forums/topic/241369-rb26dett-r32-gtr-engine-in-parts/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...