Jump to content
SAU Community

Recommended Posts

Come on guys, this is cheap....they are brand new unused!!!!!

--------

http://www.slidingperformance.com/store/in...mp;productid=52

16600RR543 6 x NISMO 555cc Injectors Nissan RB25DET $859.00 Delivered

Come on guys, this is cheap....they are brand new unused!!!!!

--------

http://www.slidingperformance.com/store/in...mp;productid=52

16600RR543 6 x NISMO 555cc Injectors Nissan RB25DET $859.00 Delivered

Once you put in these injectors, do you need a new fuel pump and new fuel regulator (higher spec)? to support this mod that is..?

Will be interested if someone can help me answer these question...

I put in nismo 740cc's in my rb25det... idles fine...runs fine.. put in a walbro fuel pump at the same time..and thats it... if you get these injectors you clearly want to make some power now or in the future... so theres no way u'd run these on a stock fuel pump... which im assuming your running on ? otherwise any after market better flowing fuel pump should be ok...

mmjc, guessing you have a 34 GTT from your profile, therefore these injectors won't fit your NEO RB25. Nismo only make 480cc injectors for the NEO.

Thanks PM-R33. I do have a R34GTT. Thanks for the tip!! I guess I will have to look out for 480cc injectors then... why are the injectors vehicle model specific? I thought injectors are injectors so long as the plug fits and screws in? And of course, the PFC can tune it to the right level.... :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...