Jump to content
SAU Community

Recommended Posts

Make: Nissan

Model: R34 GTR

Transmission: 6 spd man

Colour: White

Location: Sydney

Currently registered? Till April 2009

Price: $65000

Contact: 0414 676 953

Comments / Modifications:

First owner in Australia, the car is previously owned by Sound Uredio in Japan. Have all log books, owners manaual, 2keys etc. Before committing to purchase this car, i had 2 mecanic to check for any default and it all came up prefect. No accident, had the car dyno at 210kw atw.

Now modification and extras!

- Rays RE30s 19X10

- Ganador carbon Mirrors

- Nismo Side Skirts and Rear Pods

- Profec B specII boost controller

- Trust airnex air fitter

- Project Mu HC+ Brake Pads front and rear

- Heaps of audio gear include alpine media, alpine HU, 3 amps, Caps, splits etc all the doors and rear parcel tray has been sound deaden (Amp etc needs to reinstall/tune as it was taken out during complaince and quarantine)

Reason for sale is looking at buying my first property, the governemnt is very generous for the first home buyer.

I need to make this very clear, if you are not interested in the vehicle please dont call me for a joy ride.

Photos

IMG_0801.jpg

E794BBE5838F202221.jpg

DSC_4256.jpg

Edited by oh-low
Link to comment
https://www.sau.com.au/forums/topic/242683-r34-gtr-vspec-2/
Share on other sites

  • 5 months later...
  • 3 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...