Jump to content
SAU Community

Recommended Posts

Item: Full set of R33 braided brake lines

Age: :s

Condition: good

Price: $150

To Fit: (What car) r33 gtst is what they came off

Location: Radelaide (northern suburbs)

Contact: on here

Item: R33 type M sideskirts and rear pods in WHITE

Age: :s

Condition: good couple slight cracks

Price: $100

To Fit: (What car) r33 gtst is what they came off

Location: Radelaide (northern suburbs)

Contact: on here

Comments: pick up only

Item: NEW Greddy Copy plenum with billet 80mm throttle body

Age: NEW

Condition: good

Price: $300

To Fit: (What car) RB25

Location: Radelaide (northern suburbs)

Contact: on here

Comments: pick up only

Item: 17' PUDDY CLUB P1 rimzzzz in white with near new tyres!! eagle F1's and potenza's 235 fronts 255 rears

Age: :s

Condition: good

Price: $1000

To Fit: (What car) r33 gtst is what they came off so will fit s14/15 supra r32/33/34 ect 5x114.3

Location: Radelaide (northern suburbs)

Contact: on here

Comments: sizes would be 8 front 9 rear at a guess with the norm 33 offsets, pick up only

pic: http://www.skylinesaustralia.com/forums/post-a171566-

Edited by shy_s6
  • 2 weeks later...

still for sale guys!!! and i also found under my bed..

Item: RB25 cometic metal head gasket

Age: BRAND NEW

Condition: PERFECT

Price: $250

To Fit: (What car) RB25 standard bore (1.3mm multilayer)

Location: Radelaide (northern suburbs)

Contact: on here

hey danny,

are the brake lines adr approved? and are they front or rear??

keen as bro!

heya bud they do have some sort of ADR stampings on them (ADR7/00) and its for a set front and rear!

these were off heslo's old 33 he may know more :)

  • 2 weeks later...

sorry bud but due to SAU being stupid and not letting me edit my initial post, i had to put down that the plenum was sold about mid way in this thread :(

Brake lines SOLD

plenum SOLD

Headgasket SOLD

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...