Jump to content
SAU Community

Recommended Posts

post-28740-1227011236_thumb.jpg

this is my ehxhaust.

From the cat there are 2 mufflers in line, one closer to the cat and on near the tip as you can see in the pic.

If i removed one ( probably the one closer to the cat) will I get a deeper note or will it be excessively loud and drony..

At the moment it is a relatively quite exhaust but has a nice subtle note.

Also is there any performance gains to be had by removing a muufler. Just by looking at pictures of some

exhausts for sale, most seem to have only 1 muffler in line from the cat.

Or is this just a totally ridiculous idea that wont work????

cheers

loc

Link to comment
https://www.sau.com.au/forums/topic/245431-nismo-exhaust/
Share on other sites

If you remove the centre muffler it will make the exhaust a lot louder. Unless you're aiming for big power numbers i wouldn't bother, it will just attract more attention from the police for very little gain.

The Nismo exhausts are good because they are quiet and free flowing. I have one on my car and it's awesome except for the rediculous carbon tip :D

Link to comment
https://www.sau.com.au/forums/topic/245431-nismo-exhaust/#findComment-4269847
Share on other sites

I removed the resinator on my exhaust so it is now 3 1/2 inch from turbo through to high flow cat to x-force cannon with 5 inch tip. Mine sounded noticably louder when i had the resinator taken out, mine didnt have any drone, sounds deeper and great. But like stokesy said above, there are very minimal gains, it just makes ur exhaust louder. It does sound good though!!!

Link to comment
https://www.sau.com.au/forums/topic/245431-nismo-exhaust/#findComment-4270454
Share on other sites

And destroying something Nismo is insulting :D

I had a Mugen Twinloop on my old Integra Type R, everyone said the twinloops are so restrictive blah blah.. but, unbolting it and just running it with the mid section lost power and torque all over the rev range. Pretty much running a 2.5" straight through. Dyno tested back to back!

Generally speaking companies like that know what they are doing :P

Link to comment
https://www.sau.com.au/forums/topic/245431-nismo-exhaust/#findComment-4271541
Share on other sites

cool thanks for the replies.

Power gains is not really what im after, more so a stronger sound without it sounding ridiculously loud

i'm still undecided what to do but as gotRICE said i would be reluctant to destroy anything nismo

Link to comment
https://www.sau.com.au/forums/topic/245431-nismo-exhaust/#findComment-4271919
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...