Jump to content
SAU Community

Recommended Posts

Today I was driving home on Mona Vale Rd at around 70-80km/h when my car stalled. Stalled as in engine off, no power steering, no power assisted brakes. Gauges not working and all in dash lights out.

At the time I was playing music loudly and driving with my head lights on.

Tried to start the car, it would only turn over, no in dash lights, not even Air bag or HICAS. However, my music continues to play, air con continues to work and my clock didn't reset.

After about 30 seconds the dash comes to life and I start the car. Everything sounds as normal. After about 10 mins of driving I decide to see if my car is in limp home mode. Stock boost gage measured full boost where it usually does, revs to 7,000 rpm like it usually does.

I get home, pop the bonnet and try to replicate the problem by loading up the car electrically. Nothing happens. At this point I am relieved and decide to get on with my life, by washing my car.

I drive my car onto the grass and just before I put my hand on the keys it stops. Like before, gauges and lights are dead. This was about an hour ago and it won't start again.

So, what have I eliminated thus far...

Battery/Alternator - Car cranks over just fine

Fuses - All fuses (or at least the ones I can get at) are not blown

Relays - Like fuses, none of the relays show signs of damage

Immobiliser - Immobiliser doesn't cause the dash to die...

My car is stock except for alarm and immobiliser...

Things that I have found odd...

Disconnecting and reconnecting my CAS used to cause some relays to energise and de energise. It doesn't any more.

Fuel pump won't prime at all.

Windows won't go up

Like I said, I'm really at a loss. I wanted to go to Oran Park tomorrow, but it looks like that has gone to shit as I need to fix my car before Monday so I can get to work.

Thanks for any imput

Cass

Link to comment
https://www.sau.com.au/forums/topic/245857-engine-cranks-doesnt-start/
Share on other sites

car wont start with less than 12.6 V

so it can crank over, but not start - if its cranking and no dash lights - its definately the battery voltage issue

just jump start it

Just tried to jump start my car, didn't change a thing. Starter motor works really well though lol

To tell you the truth I'm relieved, if it started that probably would have meant I would be up for an alternator as I'm pretty sure cars aren't usually designed to run off the battery while driving :)

I'm now gong to attack the relays under the dash. I have a feeling that my problem is something to do with them...

Thanks for the help :happy:

I had the same problem a few weeks back,

-car shut off during driving

-no power steering/indicators/power windows/dash light

-stereo working fine

-it turns over but wont start

Problem turned out to be that on the back of the immobilizer circuit board, one of those small solder has burned off.

I had the same problem a few weeks back,

-car shut off during driving

-no power steering/indicators/power windows/dash light

-stereo working fine

-it turns over but wont start

Problem turned out to be that on the back of the immobilizer circuit board, one of those small solder has burned off.

I pulled apart my immobiliser, everything looks pristine there. However...

After swapping a relay under the dash with a relay that I had randomly lying around... my car now starts! :) One of the terminals on the old relay was loose... I'd say it rattled itself to death getting me home :happy:

Anyways, I'm stoked! Well... a little pissed off that I missed out on Oran Park today but still, it now works!

Thanks for your help Chris/Daniel/JOn (who didn't post here... but yeah) :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lol a few are like that with no intention of being reborn unfortunately. 
    • Done, I'll do mine soon too - whenver I take out the car next. I can cheat and make it quieter by turning off VCT at idle too - but I lose the braps
    • All trim back in wired running driving. Few things to follow up on but not far off the return to the road. att.6HN4wP38LTIOISkhA8eACoBFqzfgQMahZPLA8ut0pqE.mp4 att.w2q0ux2PGuqgQTj2Os13cNHQtqcSEcCAhD_CAXy_IQM.mp4
    • The trouble with phone apps is that they really do not know the sensitivity of the mic on each specific phone, whether there is some sort of cover or skin that can change that, etc etc. So the readings off them are not calibrated. You certainly couldn't be sure that you were even within 3 dB. I have the same app on two (actually more than that) different phones/tablets and the readings in the same room at the same time are never the same. I don't mind the apps - they are as useful as a dyno - if you're testing for delta from thing1 to thing2. But not to try to generate some sort of absolute value.
    • I'm gonna use the "Sound Meter" app from the Google Play Store and as close as I can bother to these procedures: 4. TEST METHOD FOR ALL VEHICLES EXCEPT PRE ADR83 IN-SERVICE GOODS VEHICLES AND OMNIBUSES 4.1 Microphone position 4.1.1 The microphone shall be directed towards the orifice of the exhaust outlet and shall be supported by a tripod or similar device not providing excessive acoustic reflection. The general requirements for positioning microphones are shown in the Appendix. 4.1.2 The nominal axis of maximum sensitivity of the microphone shall be substantially parallel to the test site surface and shall make an angle of 45 degrees ±10 degrees with the principal direction of gas flow from the exhaust. 4.1.3 In selecting the 45 degree alignment from the outlet of a motor vehicle fitted with two or more outlets, only the angle resulting in the microphone being farthest from any other outlet must be used. National Stationary Exhaust Noise Test Procedures for In-Service Motor Vehicles Page 3 4.1.4 The height of the microphone above the test site surface shall be equal to that of the orifice of the exhaust outlet ±25mm but shall not be less than 200mm above the test site surface. 4.1.5 The distance of the microphone from the exhaust outlet orifice shall be 500mm±25mm. 4.1.6 [Relates to vertical exhaust outlets] 4.1.7 For vehicles fitted with one exhaust outlet the microphone shall be placed so that the greatest possible distance is achieved between it and the vehicle. 4.1.8 [Relates to multi exhaust outlets] 4.1.9 [Relates to multi exhaust outlets] TLDR: 200mm off ground 45 degree angle relative to exhaust flow 500mm from tailpipe exit. (I probably won't use a tripod) Here's a photo, cause I read the instructions wrong myself.
×
×
  • Create New...