Jump to content
SAU Community

Recommended Posts

hey guys,

car wont start, problem solved it down to ignitor and coil pack area. one of my coil packs was warped from over heating... and none of them are giving spark. so i moved on to the ignitor. had a look and it appears to have been swapped with another item (wires cut and reinsulated). I get the feeling it maybe an rb20 ignitor or the likes of?? its a DIS 6 nissan item so its something 6 cylinder.

Can anyone determine what this is?

note the insulation tape...

post-32703-1227330224_thumb.jpg

close up:

post-32703-1227330295_thumb.jpg

cheers,

mike

Link to comment
https://www.sau.com.au/forums/topic/245945-rb25det-s1-ignitor-mungralized/
Share on other sites

+1 for 25 ignitor. Heres a pic rb20 vs rb25 ignitors

post-35556-1227332996_thumb.jpg

yours is a 25 in a R32 right?

Yes mine is a 25 in an R32. So i have the same one as the ignitor on the right in the above pic. BUT if you look at that pic closely that motor is an rb25. (can tell by the raised rocker covers (for VVT clearance)). So My 25, and the 25 in the picture above are using different ignitors....

Anyone know what the F is going on?

Yes mine is a 25 in an R32. So i have the same one as the ignitor on the right in the above pic. BUT if you look at that pic closely that motor is an rb25. (can tell by the raised rocker covers (for VVT clearance)). So My 25, and the 25 in the picture above are using different ignitors....

Anyone know what the F is going on?

Thats my engine, it's a r33 loom modded to accept the R32 ignitor and a few other things

Thats my engine, it's a r33 loom modded to accept the R32 ignitor and a few other things

ah k. Well now im starting to wonder if it actually IS the ignitor thats stuffed. Whats the possibility of a buggered Relay or fuse? Anyone know what fuse/relay to check on a 32? Or can point me in the direction of a wiring diagram for the ignitors?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...