Jump to content
SAU Community

Recommended Posts

hey folks,

i think someone may have taken my wheel nuts, after parking my car at north boondall station during the day yesterday, i drove about 2km and with only 2 still on the rear right in the space of about 300m after i detected the sound i moved the mirror down and seriously almost crapped myself when i saw my wheel (*edit: my entire rim) pretty much flap outwards, lurching the car sideways while i was going about 50. of course i stopped and jumped out, called some generous friends and a towie.

turns out the bolts are actually sheared from the base outwards so theres nothing to screw a nut to.

can anyone give advice on the cost of the part or give me advice?

Edited by Jumz
Link to comment
https://www.sau.com.au/forums/topic/246618-sheared-wheel-nut-bolts/
Share on other sites

ah this was like 4 years ago... and only had to replace one (as i snapped it off)

but back then it was like $10 for the new stud and bolt and $10 for the labour

or something along those lines..

you get different sizes though (length and width) so if you do it yourself just make sure you get the right ones

(maybe take one of the old ones out and take it with you)

Take what's left of the stud down to repco (QWK32 has the right dimensions though) and get them to size up the correct one (Correct spline etc, they should have it listed in their book). They were about $4 each when I had to replace them.

You can do it yourself, on my R34 (and I imagine earlier models are similar) you just have to rotate the hub (need to take the brake gear off obviously) until the stud lines up with a hole in the brake dust cover and then wack it out and stick the new one in. Bolting the wheel up pulls the stud into the spline completely.

thanks guys all fixed, im just looking for a couple of stocko rims now, i think my current rim may be unballanced

Hi Jimmy

I have 2 stock rim that you can have for $80, I am based in the City or Chandler. Regards Taylor 0408188777

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...