Jump to content
SAU Community

Recommended Posts

hey folks,

i think someone may have taken my wheel nuts, after parking my car at north boondall station during the day yesterday, i drove about 2km and with only 2 still on the rear right in the space of about 300m after i detected the sound i moved the mirror down and seriously almost crapped myself when i saw my wheel (*edit: my entire rim) pretty much flap outwards, lurching the car sideways while i was going about 50. of course i stopped and jumped out, called some generous friends and a towie.

turns out the bolts are actually sheared from the base outwards so theres nothing to screw a nut to.

can anyone give advice on the cost of the part or give me advice?

Edited by Jumz
Link to comment
https://www.sau.com.au/forums/topic/246618-sheared-wheel-nut-bolts/
Share on other sites

ah this was like 4 years ago... and only had to replace one (as i snapped it off)

but back then it was like $10 for the new stud and bolt and $10 for the labour

or something along those lines..

you get different sizes though (length and width) so if you do it yourself just make sure you get the right ones

(maybe take one of the old ones out and take it with you)

Take what's left of the stud down to repco (QWK32 has the right dimensions though) and get them to size up the correct one (Correct spline etc, they should have it listed in their book). They were about $4 each when I had to replace them.

You can do it yourself, on my R34 (and I imagine earlier models are similar) you just have to rotate the hub (need to take the brake gear off obviously) until the stud lines up with a hole in the brake dust cover and then wack it out and stick the new one in. Bolting the wheel up pulls the stud into the spline completely.

thanks guys all fixed, im just looking for a couple of stocko rims now, i think my current rim may be unballanced

Hi Jimmy

I have 2 stock rim that you can have for $80, I am based in the City or Chandler. Regards Taylor 0408188777

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...