Jump to content
SAU Community

Recommended Posts

G'day all,

As the topic title says, I have complete R33 GT-R Series 3 interior for sale - the interior consists of front and rear seats, door and rear trims on both sides.

Removed from my R33 GTST which the Interior was in when I bought the 33 5 months ago.

For age of the seats, I'd say it's off late 1997 model (to be safe) when Series 3 came out, the condition of these are good for its age, no rips or tears, no cigarette burns.

Reason for selling these wonderful, comfortable and sexy interior, I'm after different interior for my 33.

Pictures below:

Door and rear trims,

IMG_2986.jpg

*NOTE* There is a piece on passenger door trim missing, I bought the 33 like that, can source one for you if wanted.

Passenger side seat,

IMG_2991.jpg

Driver side seat,

IMG_2992.jpg

Rear seat,

IMG_2993.jpg

These seats are now occupying in my bedroom so that it won't get dirty, will give them another vaccuming sometime this week.

I'm asking $2,500 negotiable, these seats and door trims are located in Frankston South (outer Melbourne, VIC) I'm not keen to post/courier them interstate due to size and number of pieces involved, prefer pick up.

I won't separate them as I prefer to sell as whole. And I won't entertain lowballers and swap offers.

I can be contacted via PM on this forum as I'm here basically everyday.

Thanks for looking.

Cheers

Grant

Link to comment
https://www.sau.com.au/forums/topic/246904-r33-gt-r-series-3-interior-for-sale/
Share on other sites

Hey Grant

I know you said you don't want to seperate, and thats fine, but if someone happens to be chasing the fronts and door trims, I'll shotgun the rears :banana:

G'day Michael,

You're not alone, I've got number of people wanting me to separate but still won't separate them at all, don't want the hassle of selling bits.

Cheers

Grant

G'day all,

Time for me to bump this thread, yes, these lovely interiors are still for sale.

Want them? PM me!

Cheers

Grant

steering column surround and driver's side apillar shroud?

Nope, doesn't have them.

Only selling the seats and trims, thats it.

Cheers

Grant

G'day all,

Still there for you to buy!

Don't like the price? Make an reasonable offer via PM!

Cheers

Grant

G'day all,

Last chance to grab these awesome and sexy interior before I put them back on my 33!

Will look into any reasonable offers.

Cheers

Grant

G'day all,

Still got these.

Feel free to make an reasonable offer before i put them back in my 33.

Hurry!

Cheers

Grant

Anyone looking for join buy?

I just want the driver and passenger front seats.

Cheers

G'day all,

Still got these.

Feel free to make an reasonable offer before i put them back in my 33.

Hurry!

Cheers

Grant

Anyone looking for join buy?

I just want the driver and passenger front seats.

Cheers

PM sent.

Interested in the rears depending on price

PM sent.

I'd be keen on the rear seats depending on price

PM sent.

Cheers

Grant

Hey mate,

if you do end up seperating, i'm pretty keen on drivers and passanger door trim.

Thanks

At this stage, I'll try to sell it as whole but will keep you in mind if I decide to separate.

Cheers

Grant

Going twice...

If you make a really good offer that I could happily separate just front pair of seats, I would as I have a vulture from other side of Melbourne after the rest of my interior.

Remember, lowballing would get a simple 'no' from me. So make an offer VIA PM if you really want this sexy interior.

Cheers

Grant

Edited by Count Grantleyish

Yo!

Price drop to $2,400!

As usual, I'm willing to look at near reasonable offers.

Cheers

Grant

G'day all,

Still have them, for $2,400 (offers considered) you can have a sexy interior for your 33!

Cheers

Grant

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...