Jump to content
SAU Community

R33 Gtr V-spec

matt76

By matt76,
in Classifieds

 Share

Recommended Posts

matt76 Collaborator

matt76

Posted
Posted

1995 R33 Skyline GTR V-Spec

white

genuine 83000km

price: 23000 ono

reg till 20/02/09

slight modifications including: 4inch fgk full stainless exhaust from dump pipes back, apexi intake system, nismo thermostat, oil catch can, lowered king springs with new genuine nissan struts, ebc brake pads, nismo gear knob.

service: all fluid have just been changed including synthethic engine oil power steering and attessa fluid, new gates racing timing belt, fuel filter, iridium plugs, coolant, motul racing brake and clutch fluid, new gear box mount, new lh engine mount, new exhaust flange and dump gaskets on the turbo's, new lh steering rack boot, new front brake discs.

car is tidy and original but has a few minor scatches and trolley dints. the boot lid could probably do with a buff. no rust like earlier r32 are prone to. chassis rails and sills are straight and not bent from jacks. has after market wheels with slightly wider offset but i also have a brand new set of 5zigen wheels i have never fitted that i will also be selling if you don't like the oz racing wheels on it. tyres are about 75% tread and very good quality. there are the usual jap import factory option cigarette burns in the seats but the rest of the interior is tidy. the standard v-spec turbo's are still on the car (steel wheels) and have never been boosted.

i am the first owner since compliancing but have decided to sell the car to buy something to use on the race track and i could not degrade this car by modifying it!

located in shailer park, SE QLD.

contact me by reply here, pm or mobile 0409778864

post-7565-1228211703_thumb.jpgpost-7565-1228211715_thumb.jpgpost-7565-1228211725_thumb.jpg

post-7565-1228211736_thumb.jpgpost-7565-1228211749_thumb.jpgpost-7565-1228211760_thumb.jpg

post-7565-1228211769_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/247419-r33-gtr-v-spec/
Share on other sites
  • 2 weeks later...
  • 2 weeks later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...