Jump to content
SAU Community

Recommended Posts

hey guys i recently bought a freshly imported uncompliable r32 gtr for parts for another car im building... complete drivable un stuffed with car i basically have the car as it was bought in japan nothing has been removed

has a few minor mods but still std ecu and the like .8 bar boost set on the boost controller

to say the thing runs great is an understatement it does not miss at all drives great and bloody hammers in the short few hundred metre drives up the road it had when unloading it off the trailer i have had it hot and cold several times

but i did a compression test because when you hold the revs up at about 3000 or so for about 30 seconds or so a small amount of smoke starts to exit the exhaust not blue not black just smoke... no real colour to it thats noticable

compressions as tested 30 mins ago with my new snap on compression tester are as follows

1-150

2-120

3-149

4-146

5-139

6-149 all in psi

number 2 is my main concern , now im wondering is it common that engines develop sticky rings if for instance theyre sitting in a yard for ages in japan or on docks or ship etc because this car has really badly surface rusted brake rotors so it hasnt been driven properly in a long time ... ive tried sprayinga good dose of crc down all the cylinders and left it a few days then warmed it up again and re tested and this hasnt massivly changed the readings if at all...

i do know about the old teaspoon of engine oil then retest it and if it comes up its stuffed ringlands or rings etc ,i did this quickly with crc and yes it did come up but this would also cure sticky rings i havent done it properly to properly assess it yet

im just not totally convinced that the engine is broken as it really runs too good... with the filler cap off there is NO blowby at all...with loading it up on the dyno to get it hot loaded up and things like that would that help if it is sticky or is it just rooted....opinions???

Edited by WHITE R32
Link to comment
https://www.sau.com.au/forums/topic/247801-rb26-engine-compression-woes/
Share on other sites

I hope you have serviced your car and warm'd up the engine before started trashing it.

At the minimum you should replce your oil and oil filter, probabaly a good idea to change th fuel filter as well and flush the radiator.

Get a leakdown test done, it'll be more conlusive.

I hope you have serviced your car and warm'd up the engine before started trashing it.

At the minimum you should replce your oil and oil filter, probabaly a good idea to change th fuel filter as well and flush the radiator.

Get a leakdown test done, it'll be more conlusive.

i diddnt "trash" it it was well and truly warm... im not totally dumb :D i just wanted to see what i was like comming onto boost etc... 1 and 2nd gears only and not flat out

im not going to go and perform a full 100000km service on a car that im just using for parts

i do know a fair bit about cars im not looking for service advice as such... more directed at the sticky rings theory/if imported cars that have sat for ages come good after a while of use in specific cases like mine

i do plan on a leakdown test later next week but cracked piston broken ringland rooted rings sticky rings will all give the same result there too

thanks for your reply:)

Edited by WHITE R32

IF the sticky ring theory is right (i've got no idea) then try using Delvac-1 at your next oil change. Its a mixed fleet oil (can be used in diesel as well) fully synthetic, with excellent cleaning properties. I use it as my regular oil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
×
×
  • Create New...