Jump to content
SAU Community

Need To Replace Factory Stacker

R-SPEC

By R-SPEC,
in Car Audio & Electrical

 Share

Recommended Posts

R-SPEC Grand Master

R-SPEC

Posted
Posted

first off i have an r34 which had 1 of them pop up screens. ive disconnected the tv + its control unit from everything.

now for the time being i wanted to use the factory cd changer which works through the stock casette/radio unit. but it keeps switching cd's and doesnt play any of em.

im thinking the changer has had it so i wanna replace it. is it as simple as buying another 1 and plugging it in? preferably 1 that plays mp3's

any suggestions?

thanks

Link to comment
https://www.sau.com.au/forums/topic/247902-need-to-replace-factory-stacker/
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

no. the one you have is a clarion OE item. speaks N bus. the aftermarket versions speak Cbus and CEnet both of which are no where near what you have and they will not connect to what you have either.

Wacky Dee Veteran

Wacky Dee

Posted
Posted

or you can just plug the ipod into the aux input of the cd player at the front (the one in the centre console) ...obviously you'll need to control via ipod and ipod won't be powered by car's battery

I have the same factory tv popup screen/cd player unit minus the stacker in the back and it's a PITA to replace the radio/cassette player because the plastic surround is V shaped

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • bilbo117
      R34 GTR Seats / No longer reclining

      By bilbo117 · Posted

      Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Dose Pipe Sutututu
      Ethanol Content Sensor - Always at 11%?

      By Dose Pipe Sutututu · Posted

      Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • sinn3r
      R34 Skyline climate control unit transistor

      By sinn3r · Posted

      Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • GTSBoy
      Best place to order Authetic R32 Parts in Japan

      By GTSBoy · Posted

      I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...