Jump to content
SAU Community

Recommended Posts

Hi Welcome to SAU & Posting a thread!

I'd

i) make sure there's no leaks or seepage anywhere and give yourself a whole day to proceed.

ii) spot-spray degreaser but with all your electrics exposed, I'd wipe it off - and not hose it off. Baked on stains on chrome or aluminium bits can be removed with Subaru Carbie Cleaner

iii) apply Amour All equivalent such as Armour Kote from a $2 shop and again use plenty of rags as in ii). For under the bonnet, just start off with this product.

iv) apply Meguiar's Quik Detail for finishing touches.

v) don't drive in the rain lol

Cheers - Hope this helps. Tez

PS Some people who've inspected and then bought my cars have said, "You can eat off this!"

Link to comment
https://www.sau.com.au/forums/topic/247920-need-some-ideas/#findComment-4303831
Share on other sites

Eyyy!

I dont have any idea's but i sure got advise myself, might tidy my engine bay up too for the cruise :).

I was cleaning my wheels today, with jiff.. they came up okay gonna paint my brakes on saturday.

looking forward to it..

I am pretty sure I have degreaser, but if not I'll just put armour all on little shiney bits =]

See you on the cruise...

:P:):P

Link to comment
https://www.sau.com.au/forums/topic/247920-need-some-ideas/#findComment-4306390
Share on other sites

Hi Ashleigh,

Do you notice fine swirl marks on the bottom of your ktchen sink? Jif does that to your wheels as well as the sink! I'd go over your wheels with Canauba Wax to stop brake dust from getting past the coating & into those swirls or scratches.

BTW don't paint your brake calipers pink - some male dogs wee on them!

Link to comment
https://www.sau.com.au/forums/topic/247920-need-some-ideas/#findComment-4306730
Share on other sites

if you were just talking about washing it, then use simple green and spray it off. do it while the engine is warm, but not hot. now, unless you want to do it again the follwoing week, dont coat it with something thats going to attract a ton of dirt.

now, if you were talking technical, and you want to hide some wires and hoses, youll have to get creative. log onto honda-tech.com, and search the "wire tuck engine bay thread" youll be pretty amazed that some of them even run.

Link to comment
https://www.sau.com.au/forums/topic/247920-need-some-ideas/#findComment-4307651
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
×
×
  • Create New...