Jump to content
SAU Community

Recommended Posts

hey all got my cefiro for sale run down on the car have had it for around a year and a half i am the first owner in australia so i know all the history of the car has not even really been run just had it tuned at boost worx where it ran up 243rwkw power is very useable and it frys the tires quite easily, body has never been crashed and is immaculate the car looks hot and it turns heaps of heads it ius a shame to be selling but i am in the market for a house so this has to be what gives this is one of the best modifyed cefiros in adelaide so if your keen please ring and have a chat no swaps no crap just a good car for sale...

mods list is as follows

1988 nissan cefiro

custom plates silver on black (CEF WEPN)

rb25det series 2 motor + rb25 gearbox

trust tdo6-20 internal gate turbo with tust dump and front pipe

z32 ecu remapped (thanx to shaun @ boostworx)

s15 injectors 480cc

z32 afm

splitfire coilpacks

engine bay all polished ie. manifold upper and lower,cas,alternator,water inlet,throttle,crossover pipe

nismo bolt on fuel reg

bosch 040 fuel pump

front mount kit

remote oil filter kit and cooler

3 inch straight through exhaust with twin tips

stainless pod filter

s15 5-stud conversion with r32 gt-r brakes

tomei timing belt

nismo copper mix single clutch

nismo 2 way lsd differential

rays engineering gram light pro rims 17x9 +35 and 17x8 +30

kei office coilovers

front and rear cusco strut braces

sabre gauges mounted in dash oil temp,water temp,oil pressure,boost

blitz sbc id-3 boost controller

blitz r-vit information system

recaro sr reclinable seats + rails

no name deep dish steering wheel

wonder body kit and partial re-spray roof and pillars in metallic black with blue pearl

basic stereo with pioneer speakers in factory postions and jvc usb headunit

(car comes with many standard parts to replace the performance ones so regency visits are not a problem )

located in sa

price 17,000 o.n.o no time wasters

ring 0407185919 no pm if you want this car you will call thanx

post-39639-1228645204_thumb.jpg

post-39639-1228645228_thumb.jpg

post-39639-1228645253_thumb.jpg

post-39639-1228645277_thumb.jpg

post-39639-1228645298_thumb.jpg

post-39639-1228645314_thumb.jpg

post-39639-1228645356_thumb.jpg

post-39639-1228645390_thumb.jpg

post-39639-1228645411_thumb.jpg

post-39639-1228646105_thumb.jpg

post-39639-1228646133_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/248007-243-rwkw-cefiro-rb25-cefwepn/
Share on other sites

yeah i live up the street from ya prob hear it coming and going its bloody loud. oh and i will be at the hardtuned cruise if anyone wants too check the car out there cheers.

  • 2 weeks later...
  • 2 weeks later...

ok price drop too 15500 ono want to buy a ss ute so hit me with what ya got front bumper has taken a hit so if i get a deposit i will take it to my painter to get this fixed in the price really want it gone as i want a ute quick smart

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...