Jump to content
SAU Community

Recommended Posts

This is Chasers on Dynon Rd, that you mean?

I had my R33 tuned there - PFC, Z32 AFM, HKS2535GT on HKS EZ-II boost controller. Made 230rwkw - only came short due to needing splitfire coil packs and recommended S15 JDM injectors.. which I didn't managed to perform as I decided to sell the car.

If the tuner/dyno guy, Paul, is still there, worth to get him spend some time on your car. He's a good tuner with extensive Motec experience. So if you decided to go to Motec, you definitely can bring your car there for a tuneup! Price is alright, I reckon. About $70/hr 2-3 yrs ago, not sure now.

  • Like 1

I got my car tuned there too... the good thing about Chasers is that they will also work with you to achieve the results you want... e.g. I wanted good mid-range power, good response and an overall daily driver kinda tune - they helped me achieve this and will also give you tips on how to get what you want out of your ride. I highly recommend them. All the guys there are good people.

+1 for Paul and the whole crew there at Chasers. They all race their own cars at the track so they have good extensive knowledge of all aspects of building a car - from a ground-up engine job to suspension overhaul to straight wiring and tuning.

Might have to get in early for next year tho as they're not taking anymore jobs this year.

Oh, and they also just installed a 4wd dyno couple weeks ago so they can now cater for that market too.

good luck mate :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...