Jump to content
SAU Community

Recommended Posts

Hey I'm selling all my performance gear as my car is for sale. All parts were on my car in working order, made 312rwkw at 20psi with these bits bolted on. I also have some new parts for sale which were never fitted. I'm happy to sell parts seperately or as a package and can send interstate. Some prices are negotiable, don't hesitate to ask.

Garrett GT3540 0.82 rear full psi @ 4500rpm approx 10,000km old in car for 3years excellent condition. Laggy down low but up high pulled like a train. Comes with cooling lines except one water line which I unfortunately damaged. :) I'll thorw in a turbo bag aswell. $1,300

post-427-1228822011_thumb.jpg post-427-1228822345_thumb.jpg post-427-1228822410_thumb.jpgpost-427-1228822449_thumb.jpg post-427-1228825696_thumb.jpg post-427-1228825741_thumb.jpg

GCG Stainless Steel High mount exh. manifold cost around $1100 at the time of purchase, when there was hardly any copy units around. The last runner had to be modified to allow the dump pipe to fit. $400

post-427-1228823512_thumb.jpg

PSR 50mm external wastegate very good condition. Comes with screamer pipe $350

post-427-1228824030_thumb.jpg post-427-1228824059_thumb.jpg

Custom dump & front pipe with flange for plumbing in wastegate pipe. $200

post-427-1228824355_thumb.jpg

Greddy Plenum comes with std. throttle body adapter plate(never fitted used Q45 t/body) fitted to car for 2 years excellent condition. $700

post-427-1228822569_thumb.jpg

Nissan Q45 89mm Throttle Body good condition. $250

post-427-1228825445_thumb.jpg

Denso 660cc top feed high impedence injectors very good condition $500

Custom Fuel rail in anodised blue not sure of brand, purchased thru VPW about 1 year old. $200

post-427-1228824687_thumb.jpg

Powerflow injections custom top feed fuel rail for rb25det. Upgraded to the blue anodised rail purely for looks $150

post-427-1228825193_thumb.jpg

Malpassi Fuel pressure reg $100

post-427-1228825600_thumb.jpg

Trust Oil Cooler & Relocation kit very good condition 2 years old $600

post-427-1228826741_thumb.jpg

Following items are brand new.......

Mickey Thompson ET Street radials 255/50/16 x 2 on 300zx rims $500

post-427-1228826052_thumb.jpgpost-427-1228826079_thumb.jpg post-427-1228826112_thumb.jpg

Nismo Engine & G/box mounts to suit Rb25det $500 for the lot.

post-427-1228826192_thumb.jpg

Greddy Breather Tank $150

post-427-1228826451_thumb.jpg

Braided turbo cooling line kit purchased from horsepowerinabox.com, never got around to fitting it $200

post-427-1228826871_thumb.jpg

misc. items....

RB26 Timing & Coil pack covers $150

post-427-1228827247_thumb.jpg

Gktech Dump pipe suit R33 Gtst $50

post-427-1228827373_thumb.jpg

please pm if interested

cheers

Link to comment
https://www.sau.com.au/forums/topic/248334-r33-gtst-performance-parts/
Share on other sites

why did you remove all this stuff mate? stock motor?

Interested in the gate. Any chance of knowing what the lowest boost you could run with the gate was?

I'm selling my car. I've put it back to stock.

UPDATE:

Turbo kit may be sold that is: turbo, turbo bag, manifold, gate, braided lines, dump & front pipe and fuel reg...

So these items will not be seperated pending sale.

Greddy Manifold and Q45 throttle body pending.

GKtech Dump pending sale

Cheers

Edited by JET-RB

i will take the turbo mainfold if its not already gone.

please let me know asap

regards, Jack

Edited by Mr. Untouchable

Update:

Turbo, exh. manifold, gate, dump, braided lines, plenum, throttle body, injectors, blue fuel rail and reg are sold pending payment.

Nismo mounts and Oil cooler kit pending sale

dano4127 - sorry bud just what I got pictured.

cheers,

Mo

All items are available again. Got stuffed around with the turbo and intake parts.

To any potential buyers please make sure you got the funds before agreeing to purchase, just makes life a lot

easier... :P

Cheers

so both fuel rails (which take top feed injectors) can be adapted to normal r33 rb25det (side fed) ? very interetsed in the silver one :(

If you mean will it bolt on to the standard manifold, yes. Obviously you have to use top feed inj. not side feed. The silver one is available.

Update:

Injectors, rail, fuel reg, Q45 throttle body and New turbo lines SOLD

The following items are still available:

Turbo

Front and Dump pipe

Oil cooler kit (btw has an internal thermostat core size h14cm x w30cm)

wheels & tyres

psr wastegate

Nismo mounts

breather tank

rb26 engine covers

If you're interested, I'm negotiable on prices. pm me for further inquiries.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...