Jump to content
SAU Community

Recommended Posts

so i went to get my diff in my cefiro shimmed and was told that it cant be done because the centre viscous coupling/housing is sealed, is this true? it only has a stock viscous lsd and i was under the impression that they can be done or do i have to change the whole diff to a 32 unit?

any help is appreciated.

cheers

Link to comment
https://www.sau.com.au/forums/topic/248784-cefiro-diff/
Share on other sites

  • 2 weeks later...

The diff in the cefiro is the same as the diffs found in S13 and R32.

If it is viscous then it sure as hell can be shimmed.

If you have access to a decent air compressor and rattle gun then it's pretty easy to do yourself. There is a guide on the D1NZ forums.

Basically, you knock the shafts out with a mallet, undo the bolts on the bearing caps, pull the center out of the housing (make sure you watch which way all the spacers/shims/bearings/caps come out).

There is like 10 bolts holding the crownwheel to the diff center, undo these with the rattle gun, then underneath the crown wheel is 2 screws (flathead), undo these 2 screws and then you can split the center in 2 parts. You will find the shim goes inbetween these 2 parts (there is already a shim there from factory).

Then, get the halfshaft (the one that is longer than the other) and put it through the diff center to make sure that all the splines inside the diff are lined up. Make sure you do this before you reassemble the diff, otherwise you will have to pull it apart again.

Once you have the crownwheel bolted back on you can pull the halfshaft out and put the center back into the housing.

Make sure you use locktite on the bolts.

Edited by daisu
Link to comment
https://www.sau.com.au/forums/topic/248784-cefiro-diff/#findComment-4331755
Share on other sites

Yeah, they are phillips, I don't know what I was thinking, make sure you use a decent quality screwdriver and even give it a couple taps with a hammer first to try shock (and loosen) it up a bit. And yeah the shims that go on the outside of the bearings are pretty fiddly, might pay to have a friend help you.

Link to comment
https://www.sau.com.au/forums/topic/248784-cefiro-diff/#findComment-4336595
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • att.4QNbuJlz_gNZPFBGFqeEvxSUHXkGt7z40V59MrtXTPg.mp4    
    • Plan on the day will be to park trackside. Depending on space availability we will try put a small shade tent and a few of the cars on top of the hill inside turn 3, this is an easy to get to parking area with views of Turn 2, Turn 3, Turn 4 and Turn 5 and limited other pieces of the view around the track. IMPORTANT NOTE! One consideration from previous years is from memory the trackside parking sells out before the admission tickets, for that reason I encourage anyone planning on coming to buy tickets for parking now via the official website; https://www.worldtimeattack.com/ The type of parking you are looking for is 2 Day Park & View (Access Around Venue) Vehicle Pass Only Please note this does not include admission to the event itself, remember to grab that also, and kids under 12 get in for free!
    • This is going to be a mid week evening cruise. Come along and join us for a drive out to Palm Beach. This is a change of event plans after talking to some of the older members of the club. SAU NSW is planning on hitting Old Pac again shortly, stay tuned for details. When: Thursday 26th of June Time: 7:30pm meet/8:00pm departure/10:00pm finish Meet: Spit West Car Park / Spit Rd Mosman NSW 2088 Destination: Palm Beach Public Parking / 16 Ocean Rd Palm Beach NSW 2108 Up to date information as always can be found on the events page of our website, the link for this event is https://www.saunsw.com.au/events/palm-beach-cruise There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our track days. This is an official SAUNSW event and will be run under a Motorsport Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • Good time for a carbon roof  
    • Not in any way aroused by any of those, except maybe the big AMGs. And that would break my never a Euro, ever, rule.
×
×
  • Create New...