Jump to content
SAU Community

Recommended Posts

Means the air/fuel mixture inside the cylinder is exploding under its own free will from compression instead of burning when the engine ignites a spark from the spark plug.

Ie. your engine will eventually die if it continues like this.

Edited by PM-R33

thanks mate, so the fix is a tune. could it be because it was not tuned properly when i put in the Power FC a couple of months ago.

is the problem only happening when the light comes on during high boost or all the time?

Yep a tune will fix it. Did it get tuned when you installed it? Or are you just running it on the base map?

The light also flashes if the injectors are maxing out, or if the airflow metre is maxing out. So it could also be that.

Check your hand controller's max knock count, max airflow voltage and max injector duty cycle to see what one it is. But most likely it is knock.

Best bet just take it back to your tuner and get him to check it out. When you take it there, get the car's engine light to come on along the way but don't turn the car off when you get to him. That way he can have a look at all the max values on the hand controller and tell you straight away what's causing it. Whether its knock, the afm or injectors.

Good luck.

Edited by PM-R33

i started reading and when u didnt know wat knock was straight away i suspected u wouldnt have the correct fuel in it... i see it alot.... kinda makes me angry sumtimes lol..... if it was tuned on 98 and ur gonna go flog it sumwhere make sure it has that octane fuel in it. minimum u can run lower octane fuel if ur just lightly cruising but it still not recommended. my 2cents

yeh i no it was tuned on 98 and i'm ment to run 98, but the servo had run out. they only had 95 and i had 10 mintues to get to the crusie. what i didn't realise is the damage that could of been done while i was out with 300 other cars letting her have it for 4 hours.

well shouldnt it have clicked wen for sum reason sumthing different is happening now that ur not running the same petty(generally flashing lights mean get off the go peddle).... like seriously now. thats like puttin canola oil in ur sump and saying oh she'll love it..... sorry to rant on but sum ppl are just so ignorent.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...