Jump to content
SAU Community

Recommended Posts

R31 Ti for sale..series 3..1990 located in melb

pioneer head unit

pioneer speakers

cruise control

trip computer

electric antenna etc all work perfectly

very reliable..car starts everytime.

plugs changed 5 months ago

approx 260XXXkm

there is some play in the steering rack which would probably have to be changed, have been driving the car for a one and a half years as is, but would recommend changing. also the left shock is getting lazy also could be changed. very easy fix and parts can be found very cheap at pick a part just havent had the time to change as i have bought another car and have been spending my time and money on that :) you know how it is..price is negotiable can be a very good 'run around' car or even great first car due to the new p plate laws..all offers welcome.

contact number is 0423406469 or just PM..thanks guys

post-54330-1229326452_thumb.jpg

post-54330-1229326466_thumb.jpg

yer sorry as stated in the heading its got reg till april 09..

prob needs 2 tyres for roady..not sure if it needs anything else i got rwc 1 n half yrs ago pretty much as is..

u cud always go 'bodgy' rwc up to u guys

im in mill park (northern subs)

oh n btw PRICE DROP $1150

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...