Jump to content
SAU Community

Recommended Posts

Hay all

Just got defected because my exhaust is to loud 95.9 db and apparently the legal limit is 90 db dose any1 no where i could get a silencer from or if you have 1 for sale i could buy or if there is an easier way to pass

thanks

Link to comment
https://www.sau.com.au/forums/topic/249162-stupid-defect/
Share on other sites

I might have something to help you out.

They've really been cracking down lately, setting up in weird and wonderful places and stopping EVERYONE. I've never seen so much of it as in the past 3 weeks.

Observation - they pulled up approx 10-15 cars while they had me stopped and only pulled the the noise meter out on my car. Fortunately it was right on the border and they let me go. In saying that, he was only about 1-2m max from my zorst... I thought it had to be further than that?

Link to comment
https://www.sau.com.au/forums/topic/249162-stupid-defect/#findComment-4321415
Share on other sites

the silencers are now illeagle i had a rego muffler made up cost me 100 ages ago i got a recall letter telling me my zorst was to loud i put the rego one on drove over to dickson and the dude said to me is you engine running i said yeah well there isnt much point dooing the sound test then is there I lol'd

Link to comment
https://www.sau.com.au/forums/topic/249162-stupid-defect/#findComment-4321868
Share on other sites

the legal limit is 90. I had mine tested at before i could change rego over. mines just on the limit also, which is good to know cause i know they cant do shit.

i think they have to be 1.5m away from the end of the exhuast and in an open environment. if they do it next to a car or something hard then the sound can bounce of it and make it louder than what it is.

Link to comment
https://www.sau.com.au/forums/topic/249162-stupid-defect/#findComment-4321930
Share on other sites

Try telling that to the lil Paki bastard who always shows up at RTA check stations.

Haha.

It is always that same bl00dy guy every time! And there is no way what so ever that he is doing it by the book...

When I was defected, I got done for 95db... Right next to a curb surrounded by a V8 SS Ute and a WRX which were both being tested at the same time, yeh, thats fair.. Went over the RTA station and they just looked at the exhaust and it measured 79db...

Link to comment
https://www.sau.com.au/forums/topic/249162-stupid-defect/#findComment-4322174
Share on other sites

Hay all

Just got defected because my exhaust is to loud 95.9 db and apparently the legal limit is 90 db dose any1 no where i could get a silencer from or if you have 1 for sale i could buy or if there is an easier way to pass

thanks

I used city exhaust to make a quieter exhaust for rego-easy change over-just the end bit for a standardish if not a bit boring exhaust :(

Link to comment
https://www.sau.com.au/forums/topic/249162-stupid-defect/#findComment-4342198
Share on other sites

They've really been cracking down lately, setting up in weird and wonderful places and stopping EVERYONE. I've never seen so much of it as in the past 3 weeks.

Observation - they pulled up approx 10-15 cars while they had me stopped and only pulled the the noise meter out on my car. Fortunately it was right on the border and they let me go. In saying that, he was only about 1-2m max from my zorst... I thought it had to be further than that?

This falls into the same line as my questioning on the speed camera/radar deal. Same idea: any rules and regs to be found on dB requirements/ testing protocol?

Link to comment
https://www.sau.com.au/forums/topic/249162-stupid-defect/#findComment-4342263
Share on other sites

I think all this defect rule is there to provide annoyance to people who own imports.

I don't think RTA people really care about defecting your car to reduce road toll, or improve air quality. They probably know that after the inspection, you'll put the loud exhaust back on anyway.

When we were driving down to Batemans bay, an old lady did about 70km/h in a 100km/h zone for a very long time, single lane highway and overtaking lanes were scarce. She was blocking 20 cars behind her. A number of cars did some seriously dangerous overtaking manuveours, narrowly missing oncoming traffic. None of these were Japanese import sports cars and they were not speeding.

Even more serious accidents happen when you fall asleep at the wheels, even with your eyes open.

Again, this is not related to speeding.

My point is, picking on defects on cars is not related to increased road toll on long weekends.

The slogan should be "Difference in speed kills"... not "Speed kills".

Nobody speeds during double demerit time, but they overtake cars a lot more (because there are some really slow drivers on highways) and drive while sleepy. No wonder road toll still remains high on every long weekends.

Link to comment
https://www.sau.com.au/forums/topic/249162-stupid-defect/#findComment-4354298
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...