Jump to content
SAU Community

Recommended Posts

  • Replies 155
  • Created
  • Last Reply

Top Posters In This Topic

Yes, you can use the wiring for the stock boost solenoid. Mine has been wired up with spade connectors straight into the stock boost solenoid plug :(

You will need to change the way the tubes to the mac valve are set up, though.

well ive only got to choose from 1 black and 1 white wire to connect the wires from the MAC valve (which both wires are black). i dont know which one to connect to which. the wiring diagram only had the colours that come from the ecu which are LG and L/W.

and i still dont know which wires from the mac valve are + and -

I just went and had a look at mine for you. Both wires on the Mac valve are black, but it looks like one has writing on it. I also saw '---', so I guess that one is the negative. The stock BC connector is a rectangle shape with the connectors in a T sort of layout. The connector that is at one end of the rectangle connector is the negative. The one that runs down the centre of the 'rectangle' is the positive. I hope that makes sense.

OK, well there ya go then. That would explain why the wires are both black :D

yeah it confused me at first.. just like injectors.. they don't have + or -

you learn something every day ;) .. dunno what i have learnt yet though :)

yeah it confused me at first.. just injectors.. they don't have + or -

you learn something every day :D .. dunno what i have learnt yet though ;)

Yes you have...

That DiRT is a tightass and wont spend coin on a wideband

Yes you have...

That DiRT is a tightass and wont spend coin on a wideband

If i am tuning it then you are going to have to have a wideband sensor. Simple.

Anthony, get him to pull the one out of your car, then he can put it back when your done?

No.

I win. he purchased one :D I want to setup Open Loop correction on his car.. big $$ engine would be good to have some insurance when he is at power cruise

his o2 sensor is more in the front half than the rear end doof :D

Anthony would you mind PM'ing me with a basic run down of setting up antilag and cyclic idle. Did the fuel map need to be changed at all?

Edited by TiTAN
good thing I don't tune my own car then...

either way... the heart-break is still there...

hey ive tuned your car!!.. Twice! Stop your whinging!

& No can do Titan.. you got stock turbo.. i am guessing it would break on your first anti lag.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...