Jump to content
SAU Community

Recommended Posts

Well if you hadnt noticed your thread says im after 350rwhp. Your asking the wrong questions.

Get a suitable turbo first!

Well according to the workshop there are cars (r33) making 358rwhp with the same hi-flow turbo with supporting mods (which I do have btw), so I think it's fair for me to expect 350 out of mine too...

And I can't justify spending $3000 - 3500 on a new turbo setup to achieve 350rwhp..

The fact is it's making 300hp at 15psi (boost drops from 18 to 15), and I think HKS actuator is the way to go atm... at most I lose $200 and still have 300hp, but if I'm lucky it may hit 320-330 mark ;)

ECU???

It's a Remap ECU ..done by Toshi (I'm pretty happy with the job he done)

Do people know how much you can get out of a high flowed r33 turbo? Mines a RB25 and im making 290Hp at 12psi. But they guy that tunes it said he wound the boost up too 20psi but only got about 10 more Hp. Does this sound right?
SO is that to say if i have the same mods and high flow turbo and im not making near that power with more boost then my tuner did a crap job?

290hp @ 12psi sounds right, but 300 @20psi??? something's wrong some where.... I'm not an expert, but I don't think a hi-flow turbo can hold 20psi, yours must be dropping boost at high rpm just like mine.. as far as I know, the ignition timing is involved here as well

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
×
×
  • Create New...