Jump to content
SAU Community

Recommended Posts

you can actually remove that clicking noise, look up from the passenger floor behind the dash towards the heater core, (its covered in plastic) you will notice a few plugs just unplug one turn ur ignition on if the clicking is still there plug it bback in and unplug another one there is about 2 from memory and it does not effect your heating or cooling...., there hopefull solver clicking amongst 10-15 r33's

Hmmm.. I might have to have a go at that. Mine's been doing it since shortly after I got it... pretty annoying but I'm not too keen on ripping the entire dash apart. Disconnecting whatever it is shouldn't make any difference anyway, as it's obviously not working as it is currently!

*adds to list of things to do on the 'line over the xmas break...*

Edited by Samon
Hmmm.. I might have to have a go at that. Mine's been doing it since shortly after I got it... pretty annoying but I'm not too keen on ripping the entire dash apart. Disconnecting whatever it is shouldn't make any difference anyway, as it's obviously not working as it is currently!

*adds to list of things to do on the 'line over the xmas break...*

Hey man if u try this can u let us know how you go?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...