Jump to content
SAU Community

Recommended Posts

PLEASE CALL ME ON 04301 487 92 if u have any questions on any of these parts

all parts are located in NSW fairfield

GT3076R TURBO KIT = $4000

TURBO: GT3076R

*also comes with braided line for oil return*

TURBO: is in very good condition, no oil leaks, no need of rebuild *ready to bolt on*

EXHAUST HOUSING: .78 divided exhaust housing (twin scroll / split pulse)

EXHAUST HOUSING: V BAND flange for dump pipe

EXHAUST HOUSING: ceramic coated

EXHAUST MANIFOLD: exhaust manifold is made from steam pipe and comes with full life time warranty

EXHAUST MANIFOLD: is also design around the SR20 1,3,4,2 firing order. cylinders 1 and 4 are divided from 2 and 3

EXHAUST MANIFOLD: is design to work with a divided twin scroll split pulse exhaust housing

EXHAUST MANIFOLD: ceramic coated

EXTERNAL WASTEGATE: Genuine TiAL 44mm

EXTERNAL WASTEGATE: comes with scream pipe

DUMP PIPE: made to suit V band exhaust housing

DUMP PIPE: made from stainless steel

COMES WITH EVERY THING U SEE IN THIS PICTURE

DSC_0046-1.jpg

DSC_0004-1.jpg

DSC_0006.jpg

DSC_0008.jpg

DSC_0017.jpg

DSC_0018-1.jpg

DSC_0020.jpg

DSC_0021.jpg

RB25 gearbox with sr20bellhousing = $3100

comes with one piece tailshaft already modified to suit

comes with gear stick

comes with slave cylinder

basically comes with every thing need

gearbox still in very good condition and very strong not making any funny noise at all

DSC06749.jpg

R32 GTR shell, $4000

car is still repairable

damage is done to driver side of car

comes with standard R32 GTR rear end

comes with dash, carpet and all the interior

DSC00606.jpg

DSC00614.jpg

DSC00612.jpg

DSC00608.jpg

DSC00609.jpg

R32 GTR X-force Cat Back exhaust system = $300

DSC00610.jpg]

R32 GTR front and rear brakes with master cylinder = $1000

front brake pads = VN endless NEW

front brake disc in good condition and does not need any machining at all

rear brake pads standard but dont need replacing as they still have heaps of meat left on them

rear brake disc still in good condition and dont need any machining

IM SORRY BUT I DONT HAVE A PICTURE OF THE BRAKES YET, I DONT WANT TO START STRIPPING THE CAR UNLESS I KNOW IVE GOT THE PARTS SOLD

gizmo shift light (blue) 2 stage shift light = $150

i dont realli have a good picture of this item but u can kinda see it in this picture

its just sitting near my steering wheel

DSC00385.jpg

SR20VET cylinder head compete = $2000

VERY VERY VERY RARE

comes with intake and exhaust cams, rocker arms, rocker cover, crank angle sensor, intake and exhaust manifolds basically the whole top half of the engine

100_0228.jpg

100_0197.jpg

SR20V P12 Primera CAM SHAFTS BRAND NEW FROM NISSAN = $700

SR20VE (20V) neo VVL

Intake cam

Low duration: 228deg

Low lift 10.10mm

Low center angle: 114deg

High duration: 278deg

High lift: 12.00 mm

High center angle: 114deg

Exhaust cam

Low duration: 244deg

Low lift: 8.30mm

Low center angle: 106deg

High duration: 280deg

High lift: 11.15mm

High center angle: 108deg

SR20VET bottom end competer = $1500

comes with pistons, rods, crank shaft basically comes with every thing

0001RootDSCF0361.jpg

splitfire coil packs to suit S15 BRAND NEW STILL IN THE BOX NEVA USED = $600

apexi VAFC BRAND NEW STILL IN THE BOX NEVA USED = $400

controls VVL / Vtec

MSD 1000cc top feed injectors = $500

4 injectors

SARD 800cc top feed injectors = $500

4 injectors

bosch 023 fuel pump rated at 700hp = $200

Bride Zeta II bucket seat with rail = $800

23072008395.jpg

23072008401.jpg

Recaro SR3 Passenger & Driver side $1500

Rails suit: R32, R33, R34 GTST and GTR

in very good condition no holes or any thing like that

will modify rails to suit S13/S14/S15 free of charge

DSCF0856.jpg

Cusco Coil Overs With Swift Springs = $2000

suit R32 and R33

yuuu_i-img600x517-1190981085cu1-1.jpg

OS GIKEN twin plate clutch = $1000

suit SR20 5 speed gearbox only (suit S13 and S14 gearbox)

not slipping at all and still in very good condition

will work with SR20 bell housing RB25 Gearbox im selling

Power FC D jetro to R32 and R33 GTR RB26 = $1700

comes with all map sensors and harness

these are very rare now

Edited by STR8E180
Link to comment
https://www.sau.com.au/forums/topic/250094-garage-sale/
Share on other sites

  • 8 months later...
PLEASE CALL ME ON 04301 487 92 if u have any questions on any of these parts

all parts are located in NSW fairfield

GT3076R TURBO KIT = $4000

TURBO: GT3076R

*also comes with braided line for oil return*

TURBO: is in very good condition, no oil leaks, no need of rebuild *ready to bolt on*

EXHAUST HOUSING: .78 divided exhaust housing (twin scroll / split pulse)

EXHAUST HOUSING: V BAND flange for dump pipe

EXHAUST HOUSING: ceramic coated

EXHAUST MANIFOLD: exhaust manifold is made from steam pipe and comes with full life time warranty

EXHAUST MANIFOLD: is also design around the SR20 1,3,4,2 firing order. cylinders 1 and 4 are divided from 2 and 3

EXHAUST MANIFOLD: is design to work with a divided twin scroll split pulse exhaust housing

EXHAUST MANIFOLD: ceramic coated

EXTERNAL WASTEGATE: Genuine TiAL 44mm

EXTERNAL WASTEGATE: comes with scream pipe

DUMP PIPE: made to suit V band exhaust housing

DUMP PIPE: made from stainless steel

COMES WITH EVERY THING U SEE IN THIS PICTURE

DSC_0046-1.jpg

DSC_0004-1.jpg

DSC_0006.jpg

DSC_0008.jpg

DSC_0017.jpg

DSC_0018-1.jpg

DSC_0020.jpg

DSC_0021.jpg

RB25 gearbox with sr20bellhousing = $3100

comes with one piece tailshaft already modified to suit

comes with gear stick

comes with slave cylinder

basically comes with every thing need

gearbox still in very good condition and very strong not making any funny noise at all

DSC06749.jpg

R32 GTR shell, $4000

car is still repairable

damage is done to driver side of car

comes with standard R32 GTR rear end

comes with dash, carpet and all the interior

DSC00606.jpg

DSC00614.jpg

DSC00612.jpg

DSC00608.jpg

DSC00609.jpg

R32 GTR X-force Cat Back exhaust system = $300

DSC00610.jpg]

R32 GTR front and rear brakes with master cylinder = $1000

front brake pads = VN endless NEW

front brake disc in good condition and does not need any machining at all

rear brake pads standard but dont need replacing as they still have heaps of meat left on them

rear brake disc still in good condition and dont need any machining

IM SORRY BUT I DONT HAVE A PICTURE OF THE BRAKES YET, I DONT WANT TO START STRIPPING THE CAR UNLESS I KNOW IVE GOT THE PARTS SOLD

gizmo shift light (blue) 2 stage shift light = $150

i dont realli have a good picture of this item but u can kinda see it in this picture

its just sitting near my steering wheel

DSC00385.jpg

SR20VET cylinder head compete = $2000

VERY VERY VERY RARE

comes with intake and exhaust cams, rocker arms, rocker cover, crank angle sensor, intake and exhaust manifolds basically the whole top half of the engine

100_0228.jpg

100_0197.jpg

SR20V P12 Primera CAM SHAFTS BRAND NEW FROM NISSAN = $700

SR20VE (20V) neo VVL

Intake cam

Low duration: 228deg

Low lift 10.10mm

Low center angle: 114deg

High duration: 278deg

High lift: 12.00 mm

High center angle: 114deg

Exhaust cam

Low duration: 244deg

Low lift: 8.30mm

Low center angle: 106deg

High duration: 280deg

High lift: 11.15mm

High center angle: 108deg

SR20VET bottom end competer = $1500

comes with pistons, rods, crank shaft basically comes with every thing

0001RootDSCF0361.jpg

splitfire coil packs to suit S15 BRAND NEW STILL IN THE BOX NEVA USED = $600

apexi VAFC BRAND NEW STILL IN THE BOX NEVA USED = $400

controls VVL / Vtec

MSD 1000cc top feed injectors = $500

4 injectors

SARD 800cc top feed injectors = $500

4 injectors

bosch 023 fuel pump rated at 700hp = $200

Bride Zeta II bucket seat with rail = $800

23072008395.jpg

23072008401.jpg

Recaro SR3 Passenger & Driver side $1500

Rails suit: R32, R33, R34 GTST and GTR

in very good condition no holes or any thing like that

will modify rails to suit S13/S14/S15 free of charge

DSCF0856.jpg

Cusco Coil Overs With Swift Springs = $2000

suit R32 and R33

yuuu_i-img600x517-1190981085cu1-1.jpg

OS GIKEN twin plate clutch = $1000

suit SR20 5 speed gearbox only (suit S13 and S14 gearbox)

not slipping at all and still in very good condition

will work with SR20 bell housing RB25 Gearbox im selling

Power FC D jetro to R32 and R33 GTR RB26 = $1700

comes with all map sensors and harness

these are very rare now

is the power fc for a bnr32 and is the price negotiable

Thanks

Link to comment
https://www.sau.com.au/forums/topic/250094-garage-sale/#findComment-4801478
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...